Abstract:Batteries as any other electronic devices are affected by parasitic phenomena including physical processes and chemical reactions occurring within the battery materials as well as their interfaces. The phenomena lead to degradation in performance, impose operation restrictions and potentially make devices unsafe. Solid-state, lithium-metal-based, batteries show promise to meet electric vehicle market requirements, but technical challenges to overcome rapid degradation and cost-effective processing remains. Cathode/electrolyte interfacial side reactions can lead to passivating layer formation, thus increasing cell resistance, unwanted additional overvoltage, and ultimately capacity loss. These phenomena are exacerbated in solid-to-solid contact between solid state electrolytes, active materials, and electronic conductive agents. Therefore, electrode manufacturing design is required to mitigate these issues. Within this work we have evaluated Spray Drying (SD) and Atomic Layer Deposition (ALD) coating processes to engineer the cathode/ electrolyte interface of SSBs, thus improving performance and overall cell cycle life. Cathode materials coating is utilised as an effective strategy to mitigate the degradation of the interface. SD is classically utilised in the food and pharma industries, and it has recently been expanded to include the synthesis/shaping of battery electrode materials as a versatile and robust methodology that can be easily scaled up. ALD is a widely exploited technique in the semiconductor (SC) industry based on self-limiting chemical reactions to deposit stoichiometrically-fixed, defect-free and nanometric-thick materials on surfaces. As such, the application of ALD to coat powders in the battery community is innovative and currently under development. Cathodic materials such as NMC (Nickel Manganese Cobalt Oxides) have been investigated, as the need for improving the capacity retention is strong for high-content (>80%) nickel cathodes. Indeed, ALD utilised to coat NMC powder provides a nanometric thick layer of a dielectric but ionic conductive metal oxide. Optimisation of aluminium oxide shell on a core of polycrystalline high nickel material has been investigated with surface engineering. In parallel, we have been exploring the benefit of SD to create an NMC811 powder showing a decorated structure using two different approaches. Indeed, we have either used preformed metal oxide nanoparticles dispersed in an NMC suspension or synthesised a metal oxide layer on top of the NMC in-situ by a chemical reaction during the spray process. Morphological and chemical characterisation of the products have been crucial to develop the coating processes. Electrochemical Impedance Spectroscopy (EIS) probed the engineered cathode/ electrolyte interface within half- and full-coin cell configuration. Rate performance and long-term cycling evaluation has driven the design of an oxide-based lithium metal solid state battery. Alumina coated powder NMC showed longer capacity retention than raw materials when tested in coin cell batteries. The cells were assembled using thin lithium metal anode, Lithium-Lanthanum Zirconium Oxide (LLZO) electrolyte, and surface-engineered NMC811 supported by aluminium current collector. Key words : Surface Engineering, Coatings, Solid-State Batteries (SSB), Spray Dry, Atomic Layer Deposition (ALD), Preformed Nanoparticles, Nickel Manganese Cobalt Oxide (NMC), NMC811, Lithium Lanthanum Zirconium Oxide (LLZO), Interfaces. References: Sven Neudeck, Andrey Mazilkin, Christian Reitz, Pascal Hartmann, Jürgen Janek & Torsten Brezesinski ScientificRepoRts | (2019) 9:5328 Dae-Ho Kim, Syed Jazib Abbas Zaidi, Hwiyeol Park, Heung Chan Lee*, Muhammad Abdul Basit*, and Tae Joo Park Chem. Mater.2022, 34, 3539−3587 A. Sakuda, A. Hayashi, M. Tatsumisago, J. Power Sources 2010, 195, 599 N. Ohta, K. Takada, L. Zhang, R. Ma, M. Osada, T. Sasaki, Adv. Mater. 2006, 18, 2226 Y.-G. Lee, S. Fujiki, C. Jung, N. Suzuki, N. Yashiro, R. Omoda, D.-S. Ko, T. Shiratsuchi, T. Sugimoto, S. Ryu, J. H. Ku, T. Watanabe, Y. Park, Y. Aihara, D. Im, I. T. Han, Nat. Energy 2020, 5, 299 P. O. Oviroh, R. Akbarzadeh, D. Pan, R. A. M. Coetzee, T.-C. Jen, Sci. Technol. Adv. Mater. 2019, 20, 465 https://www.azom.com/article.aspx?ArticleID=19966

High Performance All-Solid-State Batteries with a Ni-Rich NCM Cathode Coated by Atomic Layer Deposition and Lithium Thiophosphate Solid Electrolyte

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Conformal Li 2 HfO 3 /HfO 2 Nanoparticle Coatings on Layered Ni-Rich Oxide Cathodes for Stabilizing Interfaces in All-Solid-State Batteries

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Atomic Layer Deposition Derived Zirconia Coatings on Ni‐Rich Cathodes in Solid‐State Batteries: Correlation Between Surface Constitution and Cycling Performance

High Lithium-Ion Conductivity, Halide-Coated, Ni-Rich NCM Improves Cycling Stability in Sulfide All-Solid-State Batteries

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through an ultrathin and amorphous Al2O3 coating

Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through ultrathin and amorphous Al2O3 coating

(Digital Presentation) Simultaneous Transforming Residual Lithium Compounds and Stabilizing Surface Lattice Oxygen for Ni-Rich Cathode Via Atomic Layer Deposition and Post-Annealing

Dual-Element-Modified Single-Crystal LiNi 0.6 Co 0.2 Mn 0.2 O 2 as a Highly Stable Cathode for Lithium-Ion Batteries

High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer

Al2O3-Coated, Single Crystal Zr/Y co-Doped High-Ni NCM Cathode Materials for High-Performance Lithium-Ion Batteries

Performance Enhancement of Nickel Manganese Cobalt Oxide Cathodic Material for Solid-State Battery Technology by Surface Engineering

Simple Solid-State Method for Synthesis of Li[Li 0.20 Mn 0.534 Ni 0.133 Co 0.133 ]O 2 Cathode Material with Improved Electrochemical Performance in Lithium-Ion Batteries

Optimized atomic layer deposition of homogeneous, conductive Al2O3 coatings for high-nickel NCM containing ready-to-use electrodes

Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD

Optimized Ni-rich LiNi0.83Co0.06Mn0.06Al0.05O2 cathode material with a Li1.3Al0.3Ti1.7(PO4)3 fast ion conductor coating for Lithium-ion batteries

High-performance LiNi0.8Mn0.1Co0.1O2 cathode by nanoscale lithium sulfide coating via atomic layer deposition

Roll-To-Roll Atomic Layer Deposition of Titania Nanocoating on Thermally Stabilizing Lithium Nickel Cobalt Manganese Oxide Cathodes for Lithium Ion Batteries