Abstract:The casting-rolling compound forming process of ring parts is an advanced plastic forming technology that has been developed due to the merits of high efficiency and energy and material saving. However, cracks often occur during the hot ring rolling process, especially at the edges of the ring parts, which severely affects the forming quality. To predict and try to avoid the occurrence of cracks in the casting-rolling compound forming process of ring parts, the high-temperature fracture behaviors of as-cast 42CrMo steel were investigated by thermodynamic experiment method. The high-temperature tensile tests were carried out using the Gleeble-3500D thermomechanical simulator at various temperatures and strain rates. Stress-strain curves and fracture morphology were examined, through which the sensitivity of stress to temperature and strain rate and the effect of dynamic recrystallization and cavity evolution on fracture were found. The law of critical fracture strains was analyzed, and the model of critical fracture strain as a function of temperature and strain rate was established. Based on Oyane criterion, the thermal ductile fracture criterion was established in conjunction with the model of critical fracture strain. By embedding this thermal damage model into the finite element (FE) model for hot ring rolling of an as-cast 42CrMo ring, the damage prediction for this process was realized, and the thermal ductile fracture criterion was proved to be reliable. From the FE results for hot ring rolling, mechanism of damage and fracture in the hot ring rolling process was analyzed. The damage threshold C f is small, and the damage ratio D is large at the top and bottom edges of the inner surface area of the ring, which have the greatest propensity to cracking in the course of hot ring rolling. This is of great significance in terms of improving the forming quality of ring parts in the casting-rolling compound forming process.

Formation criterion of fissure defects in the inner wall of the radial forged steel tube

Evolution of inner wall wrinkle defects in the sinking zone of a thick-walled steel tube during radial forging

The microstructure, texture evolution and plasticity anisotropy of 30SiMn2MoVA high strength alloy steel tube processed by cold radial forging

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Analysis of the wall thickness distortion in tube hydro-forging

Forming of Inner Faults Originating from Inclusions in the Heavy Forgings and the Process of Forging Control

Microstructure Refinement and Crack Initiation in the Forging Process

On the Fracture Possibility of Thin-Walled Tubes under Axial Crushing

Prevention of forging cracks in heavy hydro-generator shafts

Mechanism for Development of Faults Originating from Compound Inclusions in the Forging Process of 30cr2ni4mov Heavy Ingots

IDENTIFICATION OF INTERNAL DEFECTS IN THE FORGING OF THE ROTARY SHAFT MADE OF STEEL GRADE 35CRNI1MO

Effect of symmetrical position notching on cracking and cross-section quality of thick-walled metal tube under low-stress cropping

Establishment of Thermal Ductile Fracture Criterion for As-Cast 42CrMo Steel and Its Application in Hot Ring Rolling Process

A New Repair Criterion for Inconel690 Alloy Steam Generator Tube with Fretting Wear

Failure analysis of a high strength Cr-containing tube used in an oil well

New Method for Detecting Flange Fracture Initiation in Incremental Radial Extrusion

Prediction of ductile cracking in the titanium alloy forging process

A new tube forging process for manufacturing hollow parts with inner flange at an arbitrary location

Forming characteristics of thin-walled tubes manufactured by free bending process-based nontangential rotation bending die

Investigations on external separation layer defect of nickel-based superalloy in rotary tube piercing process

Inner Surface Morphology and Roughness Evolution of Pilgering Thick-Walled Tubes