Abstract:Multi‐component, High Entropy Alloys (HEA) are promising candidates for replacing conventional alloys in high temperature applications. Here, the high‐temperature corrosion of AlCrFeNiX0.5 (X= Co, Mo) was investigated. The samples are tested for their oxidation resistance at temperatures up to 1200 °C for 120 h and their behavior in NaCl/Na2SO4 at 900 °C for 96 h. They are benchmarked against commercial alloys such as FeCrAl. Despite the same contents of Al and Cr, the HEA form different oxide layers showing very different oxidation resistance. The type of oxide is related to the multiphase microstructure. The samples exhibit different amounts of ordered and unordered bcc phase. The Co‐containing specimen shows an oxidation resistance that performs similarly well as FeCrAl. Its behavior is ascribed to the formation of an Al2O3‐layer, which is very stable at high temperatures. The sample with X = Mo exhibits an additional Mo‐rich sigma phase, thus posing the risk of catastrophic oxidation. However, the Mo‐containing high entropy alloy is more resistant in the environment of molten salt. Pre‐oxidation treatment at a lower oxygen partial pressure proves to prolong lifespan of the Mo‐containing HEA in hot air. Furthermore, a positive impact on oxidation resistance by addition of Y is affirmed.This article is protected by copyright. All rights reserved.

Iron oxide fluxing and precipitation in sulphate deposits during heat-resistant alloy corrosion in simulated combustion gas

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Investigation of Selective Oxidation During Cooling of Hot-Rolled Iron-Manganese-silicon Alloys

High Temperature Oxidation of Fe-Cr Alloys in Atmospheres Containing 2.0 % SO2+5.0 % O2

Oxidation Behavior and Lifetime Prediction of Three Commercial Alloys Used in Power Plants at 550 °C in CO2 Environment

Corrosion Behaviour of Ni-based Alloys 230, 617, and 601 in CO2 Gas at 750 and 850°C

Effect of Cyclic Reaction on Corrosion Behavior of Chromium-Containing Alloys in CO2 Gas at 650 °C

Precipitation Behavior of Laves Phase in the Vicinity of Oxide Film of Ferritic Stainless Steel: Selective Oxidation-Induced Precipitation

Exploring the high-temperature steam oxidation behaviors of the lean-Cr (7–10 wt%) FeCrAl alloys

Investigation of oxide scale formation and internal oxidation of an Fe-based coating at 500 °C and 600 °C

Revealing the Oxidation Mechanism of Ferritic Heat Resistant Steel in High-Temperature Flue Gas

Influence of composition and heating schedules on compatibility of FeCrAl alloys with high-temperature steam

Effect of Alloying Chemistry on Fireside Corrosion Behavior of Ni–Fe-Based Superalloy for Ultra-supercritical Boiler Applications

Corrosion Behavior of Newly Designed Fe-Ni-Base Alloys in High-Temperature CO2 at 700 °C

Effect of aluminium and silicon on high temperature oxidation resistance of Fe-Cr-Ni heat resistant steel

Oxidation behavior of AlCoCrFeNiSi high-entropy alloys at 1100 °C

High-Temperature Oxidation Properties and Microstructural Evolution of Nanostructure Fe-Cr-Al ODS Alloys

Oxidation and Hot Gas Corrosion of Al–Cr–Fe–Ni‐Based High‐Entropy Alloys with Addition of Co and Mo

Effect of Si Content and Temperature on Oxidation Resistance of Fe-Si Alloys

Corrosion behavior of Fe based container alloys in molten Na2CO3-K2CO3 as thermal energy storage medium for reversible solid oxide cells

High temperature oxidation and chromium volatilisation of AISI 430 stainless steel coated by Mn-Co and Mn-Co-Cu oxides for SOFC interconnect application