Abstract:In this study, a new type of structure of optical fiber pressure sensor (OFPS) based on polarization modulation is proposed, which selects a high-birefringence fiber (HBF) as the sensing unit to measure the pressure in the fluid medium. The PM-1550-01 fiber produced by NTK Photonics Inc. is evaluated as the sample in our subject. Firstly, the regularities of birefringence variation on the PM-1550-01 followed by the external pressure load and the ambient temperature are analyzed by the finite element method (FEM). The results show that the pressure sensitivity is 2.05 x 10(-6) RIU/MPa in the pressure range of 0-100 MPa, and the temperature sensitivity is 7.27 x 10(-)(10) RIU/degrees C in the temperature range of 0-100 degrees C. Thus, the pressure-temperature cross-sensitivity is only 0.355 kPa/degrees C in theory. Secondly, the expression of the output light intensity of the introduced OFPS is deduced based on the principles of polarization interference and phase modulation. Combined with simulation results, the measurement ranges of the sensor can be set and adjusted by the length of the sensing unit. Finally, the proposed OFPS is fabricated and external pressure tests within the range of 0-50 MPa are completed. The results show that the pressure sensitivity is approximately 0.145 dB/MPa in the pressure range of 0-44 MPa. There is a fine consistency between the experimental data and simulation results. In addition, the proposed OFPS has many other advantages, such as small size, simple fabrication process and large measurement range, which make it appropriate to be applied in high-pressure measurement in hostile conditions, e.g., downhole and ocean-bottom.

High sensitivity pressure sensor based on a simple SPS fiber loop mirror

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

A High-Temperature Humidity Sensor Based on a Singlemode-Side Polished Multimode-Singlemode Fiber Structure

Fiber Optic Pressure Sensor Based on Polarization-Maintaining Photonic Crystal Fiber for Downhole Application

High sensitivity gas pressure and temperature optical sensors based on tapered no-core fiber coated with polydimethylsiloxane (PDMS)

A New Type of Structure of Optical Fiber Pressure Sensor Based on Polarization Modulation

Pressure sensor realized with polarization-maintaining photonic crystal fiber-based Sagnac interferometer

Highly Sensitive Optical Fiber Pressure SensorBased on FPI and Vernier Effect via FemtosecondLaser Plane-by-Plane Writing Technology

Sensitivity-Enhanced Pressure Sensor With Hollow-Core Photonic Crystal Fiber

High pressure sensor based on intensity-variation using polymer optical fiber

An Optical Fiber Pressure Sensor Based on F-P Interferometry and Intensity Demodulation

Fabricating Air Pressure Sensors in Hollow-Core Fiber Using Femtosecond Laser Pulse

A Large-Range and High-Sensitivity Fiber-Optic Fabry–Perot Pressure Sensor Based on a Membrane-Hole-Base Structure

Mono-Fiber Optic Pressure Sensor

An optical fiber Fabry–Pérot micro-pressure sensor based on beam-membrane structure

Research on the Fabrication and Parameters of a Flexible Fiber Optic Pressure Sensor with High Sensitivity

Optical Fiber Pressure Sensor Based on SMF-Capillary Structure

High Pressure Sensor Based on Photonic Crystal Fiber for Downhole Application

A Reflective Temperature-Insensitive All-Fiber Polarization-Mode Interferometer and Pressure Sensing Application Based on Pm-Pcf

Eccentric reflective optical fiber MEMS micro-pressure sensor

Compact highly sensitive Fabry-Perot temperature and gas pressure sensing probe fabricated by a femtosecond laser and PDMS