Abstract:The ceramic coating was prepared on surface of AZ31 Magnesium alloy by laser cleaning (LC) combined with micro-arc oxidation (MAO) to improve its corrosion resistance. The voltage and current were collected during the MAO process. The laser confocal, SEM/EDS, XRD and XPS were adopted to characterize the morphology, structure and phase compositions of the MAO coating. The results showed that the laser crater morphology formed on the AZ31 magnesium alloy substrate after LC treatment had a certain influence on the discharge mode and coating growth mechanism during the MAO process. The arc was preferentially generated around the laser crater due to the tip effect, resulting in the formation of MAO coating on the periphery of the laser crater first, and then gradually inside. At the same time, the oxides on surface of the LC treatment substrate increased, which would lead the generation of MAO coating more uniform and dense. Moreover, the corrosion resistance of the MAO coatings with and without LC treatment were tested by electrochemical and salt spray corrosion experiments. The self-corrosion current density of LC(20 W)/MAO coating was 1.096 × 10 −8 A·cm −2 , much lower than that of MAO coating without LC treatment (3.882 × 10 −7 A·cm −2 ) and the alloy substrate (4.499 × 10 −5 A·cm −2 ). Furthermore, there were no obvious corrosion traces for the LC(20 W)/MAO coating after 192 h of salt spray. The laser cleaning treatment combined with micro-arc oxidation provides a great important method for magnesium alloy to improve its corrosion resistance.

Microstructure and corrosion resistance of laser cladding and friction stir processing hybrid modification Al-Si coatings on AZ31B

Microstructure and corrosion behavior of Al-Ti-TiC-CNTs/AZ31 magnesium matrix composites prepared using laser cladding and high speed friction stir processing

Microstructure and properties of laser cladding Al-Si+Y2O3 coating on magnesium alloy

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

Mechanical properties and corrosion behavior of a friction stir processed magnesium alloy composite AZ31B–SiC

Microstructures and Properties in Surface Layers of Mg-6Zn-1Ca Magnesium Alloy Laser-Clad with Al-Si Powders

Corrosion Behavior of CMT Cladding Layer of AZ91 Magnesium Alloy Subjected to Friction Stir Processing

Microstructure and properties of Al-coating on AZ31 magnesium alloy prepared by pack-cementation

Effect of Y2O3 Addition on Microstructure and Properties of Laser Cladded Al-Si Coatings on AZ91D Magnesium Alloy

Deposition of Fully Dense Al-based Coatings Via In-Situ Micro-Forging Assisted Cold Spray for Excellent Corrosion Protection of AZ31B Magnesium Alloy

Microstructure and properties of in situ synthesized Fe-Al coating by laser cladding

Effect of laser cleaning on the growth and properties of micro-arc oxidation layers of AZ31 magnesium alloy

Laser cladding Al-based amorphous-nanocrystalline composite coatings on AZ80 magnesium alloy under water cooling condition

Microstructure and corrosion behavior of laser surface-treated AZ31B Mg bio-implant material

Effect of TiC nanoparticles on microstructure and corrosion resistance of laser cladding Al-CNTs composite coatings on AZ31 alloy

The effect of micro/nanostructures formed by laser ablation on the superhydrophobicity of AZ31B magnesium alloy

Improved corrosion resistance of friction stir welded magnesium alloy with micro-arc oxidation/electroless plating duplex coating

Laser Cladding of a Mg-Nd-Zn-Zr Alloy with Al-Si/Al(2)O(3 )Powders

Effect of Cold Spray Processes on Friction Stir Welded Microstructures of AZ31 Magnesium Alloys

Enhanced Corrosion Resistance of AZ91 Magnesium Alloy Through Refinement and Homogenization of Surface Microstructure by Friction Stir Processing

Corrosion resistance of Mg−Al LDH/Mg(OH)2/silane−Ce hybrid coating on magnesium alloy AZ31