Microstructure evolution and corrosion mechanism of laser cladded Zr-Cu-Ni-Al in-situ metallic glass matrix composite coatings

Liwei Hu,Xue Liu,Chuanhui Liang,Shaofan Zhao,Tianxiong Chen,Jinfeng Li,Guomin Le,Fengsheng Qu,Yuzhao Zhou,Li Qi,Dou Wang
DOI: https://doi.org/10.1016/j.surfcoat.2021.126908
IF: 4.865
2021-03-01
Surface and Coatings Technology
Abstract:<p>Laser cladding provides a widely applicable method for the preparation of metallic glass matrix composite (MGMC) coatings, where the mechanical property and the corrosion resistance can be tailored by the in-suit precipitated crystalline phases. Thus, the investigation on the microstructure evolution and corrosion mechanism of MGMC coating to achieve superior performance is of great importance. In the presented work, Zr<sub>50.7</sub>Cu<sub>28</sub>Ni<sub>9</sub>Al<sub>12.3</sub> MGMC coatings, which are constituted by Zr&amp;Cu enriched dendrites and Ni&amp;Al enriched metallic glass (MG) matrix, were prepared by laser cladding. The effect of the laser power on the microstructure and the corrosion property of the MGMC coatings was investigated. It has been found that the MG content increases and the size of the dendrites decreases with decreasing laser power. Increasing MG content in the coating can decrease the self-etching current density due to the rapid surface oxidation, and decrease the open-circuit-potential due to the higher chemical activity of MG. Besides that, a probable corrosion mechanism of the Zr-Cu-Ni-Al MGMC coating in the NaCl solution was proposed. The segregation of Cu could be the main inducement for pitting. The increasing MG phase content can suppress the segregation of Cu and therefore increase the pitting corrosion resistance of the coating.</p>
physics, applied,materials science, coatings & films
What problem does this paper attempt to address?
The paper mainly explores the microstructural evolution and corrosion mechanisms of Zr-Cu-Ni-Al metallic glass matrix composite coatings (MGMC) prepared by laser cladding. Specifically, the main objectives of the study are: 1. **Investigate the effect of different laser powers on the microstructure of the coating**: By varying the laser power, the study examines its impact on the content of the metallic glass phase (MG) and the dendrite size in the coating. 2. **Evaluate the corrosion performance of the coating**: The study investigates the changes in corrosion performance indicators such as self-corrosion current density, open circuit potential, and pitting potential of the coatings prepared under different laser powers in NaCl solution. 3. **Propose the corrosion mechanism**: The study proposes the corrosion mechanism of Zr-Cu-Ni-Al coatings in NaCl solution, particularly the reasons for pitting formation, and explores how increasing the content of the metallic glass phase can inhibit the segregation of copper elements, thereby enhancing the pitting corrosion resistance of the coating. In summary, this paper aims to systematically study the microstructure and corrosion behavior of laser-cladded Zr-Cu-Ni-Al metallic glass matrix composite coatings to obtain coating materials with superior corrosion performance.