Abstract:Low temperature nanojoining has been identified as a challenging nanotechnology in the construction of nanoscale structures as well as microelectronic devices. Herein, three kinds of Ag–Cu nanopastes have been designed by mixing different organics with the Ag–Cu nanocrystalline particles synthesized in our previous work. The mechanical properties of sintered Ag–Cu nanopaste including hardness, Young’s modulus and shear strength were investigated and analyzed. It turned out that the sintered Ag–Cu nanopaste-B with 20 wt% addition of polyethylene glycol (PEG) has lower hardness and Young’s modulus, but a much higher shear strength than Ag–Cu nanopaste-A (1,2-propanediol) and -C (terpineol), which is superior to be considered as die-attach material for high temperature packaging material for wide band gap semiconductors. The uniform and dense sintered nanopaste-B layer presents a feature of eutectic microstructure comprised of Ag-rich and Cu-rich phases. It was also interesting to find that remarkable nanostructural solid solubility arose in Ag-rich phase (36 At% Cu) and Cu-rich phase (44 At% Ag). Moreover, the atomic inter-diffusion at interface could eventually interlock between the sintered nanopaste and substrate, which allows the Cu chip firmly attaching onto the Cu substrate. This work not only breaks through the synthesis bottleneck of Ag–Cu alloy NPs and a new bonding material, but also has the potential to affect a broad fields range.

Sonochemical synthesis of silver nanoparticles coated copper wire for low-temperature solid state bonding on silicon substrate

Large-scale synthesis of Ag nanoparticles by polyol process for low temperature bonding application

Innovative Multiphase Ultrasonic-Assisted Method for High-Purity, Stable, and Cost-Effective Copper Nanowire Synthesis

Preparation of Silver Nanosheets Used for Low Temperature Bonding

Large-Scale synthesis of silver nanoparticles by aqueous reduction for low-temperature sintering bonding

A mild aqueous synthesis of ligand-free copper nanoparticles for low temperature sintering nanopastes with nickel salt assistance

Low-Temperature Cu-Cu Bonding Using Silver Nanoparticles Fabricated by Physical Vapor Deposition

Polymer-Protected Cu-Ag Mixed NPs for Low-Temperature Bonding Application

Sonochemical Synthesis of Amorphous Long Silver Sulfide Nanowires

Mechanism of Low Temperature Sintering-Bonding Through In-Situ Formation of Silver Nanoparticles Using Silver Oxide Microparticles

Low Temperature Bonding of Cu Metal through Sintering of AgNanoparticles for High Temperature Electronic Application

The Synthesis of Cu-Ag Core-Shell Bimetallic Nanoparticles for IC Bonding

Bonding of Cu to Cu bulks through the low temperature sintering of Ag nanoparticle paste

Interfacial Nano-Mechanical Properties of Copper Joints Bonded with Silver Nanopaste Near Room Temperature

Sonication-Assisted Electrochemical Synthesis of Silver Nanoparticles

Ambient Aqueous-Phase Synthesis of Copper Nanoparticles and Nanopastes with Low-Temperature Sintering and Ultra-High Bonding Abilities

Microstructural characteristics and properties of Cu@Ag NPs interconnect joints fabricated via ultrasound-assisted sintering

Synthesis of ultra-long silver nanowires and the joining of silver networks

Low-Temperature Sintering of Nanoscale Silver Pastes for High-Performance and Highly-Reliable Device Interconnection

Low temperature nanojoining of silver–copper nanopaste as die attach material for high temperature packaging

A Novel Cu@Ag Nano Paste with Low Porosity for Rapidly Sintering in Air Condition