Abstract:Flat, micro‐ribbon ultra‐high molecular weight polyethylene fibers were gel spun using orange terpenes as a bio‐derived solvent that achieved 4× greater tenacity than previous works. Morphological, thermal, microstructural, and mechanical characterizations revealed the process‐structure–property relations of these sustainably‐produced, high‐performance fibers. Toxic, hazardous petrochemical solvents are commonly used for industrial‐scale ultra‐high molecular weight polyethylene (UHMWPE) fiber production, but orange terpenes, a byproduct of orange fruit production, present a bio‐derived, sustainable alternative. In this work, fine UHMWPE fibers were spun using orange terpenes as the spin solvent, hot‐drawn at a draw ratio of 5:1, investigated for their morphology, microstructure, and thermal and mechanical properties. The resulting fibers exhibited a flat, micro‐ribbon cross‐section, which is highly desirable for achieving high fiber volume fractions in UHMWPE‐fiber reinforced composites. After drawing, the fibers possessed 4× greater breaking tenacity than any previously published studies on UHMWPE fibers spun using orange terpenes with a tenacity of 8.6 cN/dtex and tensile modulus of 229.2 cN/dtex. Microstructural analysis via differential scanning calorimetry and X‐ray diffraction revealed that the hot drawing process significantly increased molecular orientation, but crystallinity decreased due to crystallite melting during drawing. Therefore, the mechanical properties of these fibers may be significantly improved with optimization of the fiber drawing process. This work establishes the strong potential of orange terpenes as an environmentally‐friendly alternative solvent for UHMWPE gel spinning and sets a foundation for future parametric optimization of the spinning and drawing of these fibers. Highlights Micro‐ribbon ultra‐high molecular weight polyethylene fibers were prepared using bio‐solvent orange terpenes. Flat profile enables tight packing, aspect ratio maintained after drawing. Drawn fibers were 4× stronger than any previous work with orange terpenes. Near‐melt drawing reduced crystallinity, improved molecular alignment.

Synthetic Rope Properties and End Connector Concepts For Use in Timber Harvesting Applications

Study of the Mechanical Properties of Ultra-High Molecular Weight Polyethylene Fiber Rope

Experimental Evaluation of Dimension-Stable Synthetic Fibre Rope under Investigation of Spooling Test on the Multilayer Winch Drum

Cyclic testing of continuously wetted synthetic fiber ropes

Experimental investigation of spooling test on the multilayer oceanographic winch with high-performance synthetic fibre rope

Application and Mechanical Evaluation of Polyarylate Fiber Rope in Wire Drive Mechanism of Robotic Surgical Instruments

A novel fiber-reinforced polymer rope: Concept design and experimental evaluation

A novel fiber‐reinforced polymer rope: Simulation and theoretical investigation

Development and Experiment Research on Multi-function Wire Rope for Manned Rescue Lifting Equipment

Ultra‐high molecular weight polyethylene micro‐ribbon fibers gel spun using orange terpenes

Experimental Investigation of Stresses in Winch Drums Subjected to Multilayer Spooling Loads From Synthetic Fibre Ropes

Comparative Test on the Tensile Mechanical Properties of High-Strength Polyethylene and Common Polyethylene Braided Netting Twine for Fishing

High-strength tubular braided rope for fishing and braiding method thereof

A Three Dimensional Approach to Model Steel Wire Ropes Used in High Energy Absorber Apparatus

A New Fully-Detailed Finite Element Model of Spiral Strand Wire Ropes for Fatigue Life Estimate of a Mooring Line

Experimental-based statistical models for the tensile characterization of synthetic fiber ropes: a machine learning approach

Basic study for drive mechanism with synthetic fiber rope – investigation of strength reduction by bending and terminal fixation method

Abrasion performance and failure mechanism of fiber yarns based on molecular segmental differences

Wear mechanisms in polymeric mooring ropes during yarn-on-yarn wear tests

Experimental measurement for dynamic tension fatigue characteristics of HMPE fibre ropes

Fatigue and impact load: Experimental investigation on mechanical behavior of high modulus polyethylene yarns