Abstract:Polymers and Polymer Composites, Volume 30, Issue , January-December 2022. Synthetic ropes have been used as alternatives for wire ropes owing to their low specific weight and excellent mechanical characteristics. They are essential for offshore mooring in deep water because, at these depths, the weight of steel cables and chains would exceed the forces supported by the platform structure. In addition, they are used in several applications, such as robotics, mountain climbing, fire rescue and lifting loads, sternum closure after medical surgery. They are even used as artificial muscles and active endoscopes because of their high flexibility. These applications are typically characterized by the presence of dynamic loads. Thus, this study aims to experimentally investigate the mechanical behavior of high-modulus polyethylene yarns, supplied by three different manufacturers. The yarns were analyzed after being subjected to impact load and after experiencing fatigue. The interaction between impact load and fatigue was also studied. First, the force, strain, and energy absorbed after the impact load were verified. Subsequently, the influence of the impact load on the fatigue life of the materials was analyzed. Finally, thermal analysis (DSC and TGA) and chemical analysis (FTIR, DRX, and EDS) were performed to compare the materials. It was observed that the mechanical and thermal behaviors of the three materials differed, and there was a reduction in fatigue life, which depended on the impact load due to yarn degradation. Finally, it is concluded that properties such as tensile strength should not be used as the sole parameter for dimensioning polymeric materials, because they exhibit different material properties in several tests despite possessing similar tensile strength.

Wear mechanisms in polymeric mooring ropes during yarn-on-yarn wear tests

Fatigue and impact load: Experimental investigation on mechanical behavior of high modulus polyethylene yarns

Experimental study on the behavior of polyamide multifilament subject to impact loads under different soaking conditions

Cyclic testing of continuously wetted synthetic fiber ropes

Abrasion performance and failure mechanism of fiber yarns based on molecular segmental differences

Experimental evaluation of the main parameters influencing friction between polyamide fibers and influence of friction on the abrasion resistance

Yarn on yarn abrasion failure mechanism of ultrahigh molecular weight polyethylene fiber

Yarn on yarn abrasion performance of high modulus polyethylene fiber improved by graphene/polyurethane composites coating

Study on the wear characteristics of carbon fiber yarns under the influence of multifactor coupling on braiding carriers

Numerical simulation with hyperelastic constitutive model for high-performance multifilaments used in offshore mooring ropes

Experimental investigation of spooling test on the multilayer oceanographic winch with high-performance synthetic fibre rope

A New Fully-Detailed Finite Element Model of Spiral Strand Wire Ropes for Fatigue Life Estimate of a Mooring Line

Experimental Evaluation of Dimension-Stable Synthetic Fibre Rope under Investigation of Spooling Test on the Multilayer Winch Drum

Nanomechanics of Advanced Polymer Fibres

Influence of natural fiber addition and fiber length in determining the wear resistance of epoxy‐based composites

Experimental Characterization of Stiffness of a Polyester Mooring Rope for a CFPSO

Impact of yarn compositions, loop length, and float stitches on the mechanical behavior of knitted fabrics via full factorial design and RSM

Novel method for mechanical characterization of polymeric nanofibers

Experimental-based statistical models for the tensile characterization of synthetic fiber ropes: a machine learning approach

Bio-inspired carbon nanotube-polymer composite yarns with hydrogen bond-mediated lateral interactions

Effect of time-varying corrosion on the low-cycle fatigue mechanical properties of wire rope