Abstract:Ability to maintain superhydrophobic state of microstructured PP/POE/GP surfaces over varying distances of abrasion. Superhydrophobic microarchitectured polyolefin surfaces are currently used intensively in various industrial applications. However, the deployment of products made of these materials into practical application is typically constrained by their inferior dry sliding behaviors, which stem from their limited strength and toughness. To obtain reinforced and toughened superhydrophobic microstructured surfaces that can be easy to demold and overcome friction in the workplace, elastomeric ethylene–octene copolymer (POE) and rigid graphene (GP) were introduced into the polypropylene (PP) matrix to prepare microstructured PP/POE/GP surfaces by compression molding. The elongation at break is significantly improved by 2000% and reached up to 520.33%. The contact angle (CA) of the microstructured PP/POE/GP surface increases to 154.4°. They exhibit superhydrophobic and low adhesion characteristic, that is, lotus effect. The enhanced toughness of PP/POE/GP composites reduces wear debris and damage to microarchitecture during the abrasion process. Even after the microstructured PP/POE/GP surfaces were worn after a distance length of 3000 mm, they still exhibited superhydrophobic, but high adhesion characteristic, that is, petal effect. The controlled shape‐morphing microarchitectures formed on the microstructured PP/POE/GP surface abraded after 1000 mm, possessing wetting stability during droplet impacting. Highlights The elongation at break of composites was improved by 2000% through adding POE. The composite microstructure deforms to consume energy during abrasion and POE reinforces this energy dissipation process. POE improves fracture toughness and wetting stability of composites.

Yarn on yarn abrasion performance of high modulus polyethylene fiber improved by graphene/polyurethane composites coating

Yarn on yarn abrasion failure mechanism of ultrahigh molecular weight polyethylene fiber

Abrasion performance and failure mechanism of fiber yarns based on molecular segmental differences

Superior Enhancement of the UHMWPE Fiber/Epoxy Interface through the Combination of Plasma Treatment and Polypyrrole In-Situ Grown Fibers

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Enhanced wear resistance of ultra‐high molecular weight polyethylene fibers by modified‐graphite oxide

Enhanced Mechanical Performance of Electrospun Graphene/Polyacrylonitrile (PAN) Composite Microfibrous Yarns Via Post-Processing

Preparation of Ceramic Fiber Threads with Enhanced Abrasion Resistance Performance

Tribological Behaviour of POM Reinforced by Graphene and PTFE

Fatigue and impact load: Experimental investigation on mechanical behavior of high modulus polyethylene yarns

Study of the Mechanical Properties of Ultra-High Molecular Weight Polyethylene Fiber Rope

A novel PDA/POSS transition layer on the surface of UHMWPE fibers by co-depositing to improve the mechanical properties of composites

Improvement of Copper Oxides-coated Ultra-high Molecular Weight Polyethylene Fibers Reinforced Rigid Polyurethane Composites in Strength and Toughness

Experimental evaluation of the main parameters influencing friction between polyamide fibers and influence of friction on the abrasion resistance

A Comprehensive Review of Ultrahigh Molecular Weight Polyethylene Fibers for Applications Based on Their Different Preparation Techniques

Ultra-High Molecular Weight Polyethylene Fibers/Epoxy Composites: Effect of Fiber Treatment on Properties

Bio-inspired carbon nanotube-polymer composite yarns with hydrogen bond-mediated lateral interactions

Engineering Interfaces toward High-Performance Polypropylene/Coir Fiber Biocomposites with Enhanced Friction and Wear Behavior

Wear mechanisms in polymeric mooring ropes during yarn-on-yarn wear tests

Compression molding of ethylene–octene copolymer‐toughened polypropylene/graphene surfaces with actively controlled shape‐morphing microarchitectures induced by friction and wear

Effect of polyester fiber orientation on the tribological properties of ultrahigh molecular weight polyethylene composites for water lubrication