Abstract:Three-stranded polyethylene ropes and twines are widely used as one of the main materials for fishery facilities. The shape and performance of the net fishing facilities in water are determined by the hydrodynamic properties of these ropes and twines. In the present work, experiment investigation was made in the flume tank in Tokyo University of Marine Science and Technology. Five kinds of three-stranded polyethylene rope with different sizes of diameter were tested. Drag and lift forces, together with sideways force acting on ropes under various trial conditions were measured by underwater load cells which were independently developed by the authors to record three axial force components. The drag, lift and sideways forces per unit rope length, under various attack angles at several flow velocities were obtained through data analysis. Then the drag coefficient, the lift coefficient and the sideways force coefficient were calculated within the range of Reynolds numberRd= 2.5×103~3.0×104. The following conclusions may be made from the experimental results: (1) At all the three testing attack angles i.e. 45o, 60o and 90o, the drag per unit rope length is proportional to the square of flow speed; (2) As the attack angle equal to 90o, the drag coefficient can be expressed in a power function of Reynolds number as given below: It can be inferred that the drag coefficient is approximately equal to 1.4 in the automatic model region, i.e. 1.2×104<Rd< 3.0×104. (3) As the attack angle equal to 45o or 60o, the lift force per unit rope length is proportional to the 2.5thpower of flow speed and the lift coefficient has a similar trend as the drag coefficient. But the lift coefficient makes smaller fluctuation compared to the drag coefficient when tending to a constant value in the automatic model region, i.e. 1.2×104<Rd<3.0×104.

Study of the Mechanical Properties of Ultra-High Molecular Weight Polyethylene Fiber Rope

Structure and Properties of Gel‐spun Ultra‐high Molecular Weight Polyethylene Fibers Obtained from Industrial Production Line

Experimental Evaluation of Dimension-Stable Synthetic Fibre Rope under Investigation of Spooling Test on the Multilayer Winch Drum

Revealing the role of molecular weight on mechanical reinforcement of highly oriented UHMWPE fibers

Tensile Strength Statistics and Fracture Mechanism of Ultrahigh Molecular Weight Polyethylene Fibers: On the Weibull Distribution

Rheological Properties of UHMWPE/HDPE Blend Gels and Morphology and Mechanical Properties of Gel‐spun Fibers

Study on Structures and Properties of Ultra-Hot Drawing UHMWPE Fibers Fabricated Via Dry Spinning Method

A novel fiber-reinforced polymer rope: Concept design and experimental evaluation

A novel fiber‐reinforced polymer rope: Simulation and theoretical investigation

Enhancing Gel Spinning of Ultra-High Molecular Weight Polyethylene: Insights into Rheology and Microstructure

Yarn on yarn abrasion failure mechanism of ultrahigh molecular weight polyethylene fiber

Abrasion performance and failure mechanism of fiber yarns based on molecular segmental differences

Orientation evaluation of ultra‐high molecular weight polyethylene fibers: previous studies and an improved method

Fatigue and impact load: Experimental investigation on mechanical behavior of high modulus polyethylene yarns

Experimental measurement for dynamic tension fatigue characteristics of HMPE fibre ropes

Yarn on yarn abrasion performance of high modulus polyethylene fiber improved by graphene/polyurethane composites coating

Simulation Analysis of Structural Strength of 12 -Strand Two-Dimensional Braided PBO Rope

Extended Chain Crystals of Ultra High Molecular Weight Polyethylene Fiber Prepared by Melt Spinning

Fabrication and properties of ultra-high molecular weight polyethylene/polyester composite yarn

Experimental Study on Hydrodynamic Characteristics of Three-Stranded Polyethylene Rope

Dissolving of Ultra-high Molecular Weight Polyethylene Assisted Through Supercritical Carbon Dioxide to Enhance the Mechanical Properties of Fibers