Abstract:Scanning probe microscopy was used to simultaneously determine the molecular chain structure and intrinsic mechanical properties, including anisotropic elastic modulus and friction, for lamellae of highly oriented high-density polyethylene (HDPE) obtained by the melt-drawn method. The molecular-scale image of the highly oriented lamellae by friction force microscopy (FFM) clearly shows that the molecular chains are aligned parallel to the drawing direction, and the periodicities along and perpendicular to the drawing direction are 0.26 and 0.50 nm, respectively. The results indicate that the exposed planes of the lamellae resulting from the melt-drawn method are (200), which is consistent with results of transmission electron microscopy and electron diffraction. Because of the high degree of anisotropy in the sample, coming from alignment of the molecular chains along the drawing direction, the measured friction force, F, determined by FFM is strongly dependent on the angle, theta, between the scanning direction and the chain axis. The force increases as theta is increased from 0 degrees (i.e., parallel to the chain axis) to 90 degrees (i.e., perpendicular to the chain axis). The structural anisotropy was also found to strongly influence the measurements of the transverse chain modulus of the polymer by the nanoindentation technique. The measured value of 13.8 GPa with transverse modulus was larger than the value 4.3 GPa determined by wide-angle X-ray diffraction, which we attributed to anisotropic deformation of the lamellae during nanoindentation measurements that was not accounted for by the elastic treatment we adopted from Oliver and Pharr. The present approach using scanning probe microscopy has the advantage that direct correlations between the nanostructure, nanotribology, and nanomechanical properties of oriented samples can be determined simultaneously and simply.

Orientation evaluation of ultra‐high molecular weight polyethylene fibers: previous studies and an improved method

Drawing and Ultimate Tensile Properties of Modified Polyamide 6 Fibers

Nanostructure and Mechanical Measurement of Highly Oriented Lamellae of Melt-Drawn HDPE by Scanning Probe Microscopy

Structure and Properties of Gel‐spun Ultra‐high Molecular Weight Polyethylene Fibers Obtained from Industrial Production Line

Study on Structures and Properties of Ultra-Hot Drawing UHMWPE Fibers Fabricated Via Dry Spinning Method

Structure and Mechanical Properties of Porous Ultra-High Molecular Weight Polyethylene

Revealing the role of molecular weight on mechanical reinforcement of highly oriented UHMWPE fibers

The effect of shrinkage on the structure and properties of ultra‐high molecular weight polyethylene fibers with different concentration

Influencing Factors and Measuring Method of the Heat Conducting Performance of UHMWPE Single Fiber

The influence of formation temperatures on the crystal structure and mechanical properties of ultrahigh-molecular-weight polyethylene/high-density polyethylene-blend fibers prepared by melt spinning

Orientation in High-Density Polyethylene/inorganic Whisker Composite Fibers As Studied Via Polarized Fourier Transform Infrared Spectroscopy

Rheological Properties of UHMWPE/HDPE Blend Gels and Morphology and Mechanical Properties of Gel‐spun Fibers

Tensile Strength Statistics and Fracture Mechanism of Ultrahigh Molecular Weight Polyethylene Fibers: On the Weibull Distribution

Study of the Mechanical Properties of Ultra-High Molecular Weight Polyethylene Fiber Rope

Enhancing Gel Spinning of Ultra-High Molecular Weight Polyethylene: Insights into Rheology and Microstructure

Ultra-High Molecular Weight Polyethylene Fibers/Epoxy Composites: Effect of Fiber Treatment on Properties

Optimization of hot drawing process of ultra‐high molecular weight polyethylene monofilament prepared by melt spinning

Fabrication and properties of ultra-high molecular weight polyethylene/polyester composite yarn

Effect of tension during sulfonation stabilization for UHMWPE-derived carbon fibers

Real-time ultrasonic characterization of the chain orientation of high density polyethylene melts during processing

Study of the Microstructure Formation Mechanisms of Poly(ether‐ether‐ketone) Monofilaments Via Melt Spinning