Abstract:In this study, a polyarylate fiber rope, which is a high-strength synthetic fiber rope, is used in the wire drive mechanism of a multi-degree of freedom (DOF) robotic forceps to evaluate its mechanical practicability. Using a nonconducting material for the drive wire, different from typical use of metallic wires made of stainless steel and tungsten, a technology is developed to simplify the insulation structure significantly, decrease the diameter of the robotic surgical instrument, and lower its cost. In this study, first, a prototype of the multi-DOF robotic forceps equipped with a polyetheretherketone (PEEK) resin flexible wrist joint part with an external diameter of 5 mm is manufactured. The prototype is used to evaluate the assembling of a polyarylate fiber rope with a diameter of 0.34 mm in a multi-DOF mechanism and examine the endurance of the rope to mechanical motions under a single-use assumption. As fastening structures to assemble the rope – a crimp terminal using a hollow pipe and a thread knot – are examined individually by assembling them in the prototype robotic forceps and conducting strength tests of the tension generated by the drive. The test results show that the thread knot method exerts a stabler fastening strength than the hollow pipe method. However, a problem of the former is that the wire may break because of its strong contact with the edge of the hole of the wire guide. Subsequently, to evaluate the endurance of the rope to single-use operation motion, operation tests are conducted by implementing reciprocating bending motions of the flexible wrist joint part of the robotic forceps 1,000 times. The assembled rope endures the sliding within the flexible wrist joint part and the contact loading with the guide part and the fixed structure within the cartridge repeatedly. The endurance operation test results confirm that the drive transmission of the polyarylate fiber rope has sufficient mechanical endurance to 1,000 reciprocating bending motions of the PEEK flexible wrist joint part.

Application and Mechanical Evaluation of Polyarylate Fiber Rope in Wire Drive Mechanism of Robotic Surgical Instruments

Continuous Micron-Scaled Rope Engineering Using a Rotating Multi-Nozzle Electrospinning Emitter

Basic study for drive mechanism with synthetic fiber rope – investigation of strength reduction by bending and terminal fixation method

A novel fiber‐reinforced polymer rope: Simulation and theoretical investigation

A novel fiber-reinforced polymer rope: Concept design and experimental evaluation

Characterization of Friction within a Novel 3 mm Wristed Robotic Instrument

A Three Dimensional Approach to Model Steel Wire Ropes Used in High Energy Absorber Apparatus

Development and Experiment Research on Multi-function Wire Rope for Manned Rescue Lifting Equipment

Study of the Mechanical Properties of Ultra-High Molecular Weight Polyethylene Fiber Rope

Experimental investigation of spooling test on the multilayer oceanographic winch with high-performance synthetic fibre rope

A Tension Sensor Array for Cable-Driven Surgical Robots

Experimental Evaluation of Dimension-Stable Synthetic Fibre Rope under Investigation of Spooling Test on the Multilayer Winch Drum

Fiberbots: Robotic fibers for high-precision minimally invasive surgery

Design and Experimental Test of Rope-Driven Force Sensing Flexible Gripper

A Development of Rigid-Flexible Outer Sheath Using Slider-linkage Locking Mechanism and Air Pressure for Endoscopic Surgery

Mechanical analysis of a type of wire rope subjected to tension

Robotic Perception-motion Synergy for Novel Rope Wrapping Tasks

A Miniature 3-DoF Flexible Parallel Robotic Wrist Using NiTi Wires for Gastrointestinal Endoscopic Surgery

Rigid-Flexible Outer Sheath Model Using Shape Lock Mechanism By Air Pressure And Wire Driven Curving Mechanism

Synthetic Rope Properties and End Connector Concepts For Use in Timber Harvesting Applications

Research on the Rigidity Adjustment Performance of Flexible Surgical Arm Based on Fiber-coated Pneumatic Structure