Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

The effect of oxygen affinity electrode Ti on the performance of vanadium oxide-based valence change resistive random access memory

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Endurance Enhancement Of Cu-Oxide Based Resistive Switching Memory With Al Top Electrode

Improvement of endurance degradation for oxide based resistive switching memory devices correlated with oxygen vacancy accumulation effect

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Oxygen vacancy engineering of TaOx-based resistive memories by Zr doping for improved variability and synaptic behavior

Influence of Metal Electrode on the Performance of ZnO Based Resistance Switching Memories

Bipolar Resistive Switching Characteristics of HfO2/TiO2/HfO2 Trilayer-Structure RRAM Devices on Pt and TiN-Coated Substrates Fabricated by Atomic Layer Deposition

Effect of Oxygen Profiles on the RS Characteristics of Bilayer TaOx/TaOy Based RRAM

Endurance Degradation in Metal Oxide-Based Resistive Memory Induced by Oxygen Ion Loss Effect

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

Role and optimization of thermal rapid annealing in Ta/TaOx/Ru based resistive switching memory

Variability Improvement of TiOx/Al2O3 Bilayer Nonvolatile Resistive Switching Devices by Interfacial Band Engineering with an Ultrathin Al2O3 Dielectric Material

Effect of Electrochemically Active Top Electrode Materials on Nanoionic Conductive Bridge Y2O3 Random-Access Memory

Enhancement Of Resistive Switching Ratio Induced By Competing Interfacial Oxygen Diffusion In Tantalum Oxide Based Memories With Metal Nitride Electrode

Improved Uniformity of TaOx-Based Resistive Random Access Memory with Ultralow Operating Voltage by Electrodes Engineering

Ionic Doping Effect In Zro2 Resistive Switching Memory

Nonvolatile resistive switching memory behavior of the TiOx-based memristor

Migration of Interfacial Oxygen Ions Modulated Resistive Switching in Oxide-Based Memory Devices

Initial electrical properties of tantalum oxide resistive memories influenced by oxygen defect concentrations

Electrode Effect on Resistive Switching of Ti-added Amorphous SiOx Films