Abstract:Miniaturization is important to make implants clinic friendly. Wireless power transfer is an essential technology to miniaturize implants by reducing their battery size or completely eliminating their batteries. Traditionally, a pair of inductively-coupled coils operating at radio-frequency (RF) is employed to deliver electrical power wirelessly. In this approach, a rectifier is needed to convert the received RF power to a stable DC one. To achieve high efficiency, the induced voltage of the receiving coil must be much higher than the turn-on voltage of the rectifying diode (which could be an active circuit for low turn-on voltage) [1]. In order to have a high induced voltage, the size of the receiving coil often is significantly larger than rest of the implant. A rotating magnets based wireless power transfer has been demonstrated to deliver the same amount of power at much lower frequency (around 100 Hz) because of the superior magnetic strength produced by rare-earth magnets [2]. Taking the advantage of the low operating frequency, an innovative feed-forward controlled AC to DC boost converter has been demonstrated for the first time to accomplish the following two tasks simultaneously: (1) rectifying the AC power whose amplitude (500 mV) is less than the rectifier's turn-on voltage (1.44 V) and (2) boosting the DC output voltage to a much higher level (5 V). Within a range, the output DC voltage can be selected by the control circuit. The standard deviation of the output DC voltage is less than 2.1% of its mean. The measured load regulation is 0.4 V/kΩ. The estimated conversion efficiency excluding the power consumption of the control circuits reaches 75%. The converter in this paper has the potential to reduce the size of the receiving coil and yet achieve desirable DC output voltage for powering biomedical implants.

A High Efficiency and High Power Density Active AC/DC Converter for Battery-Less US-Powered IMDs in a 28-nm CMOS Technology

Digitally Assisted High-Voltage High-Current CMOS Active Rectifier for Implantable Devices

Integrated ultra-low power precision rectifiers for implantable medical devices

A 13.56 MHz pulse-width modulation active rectifier for implantable medical devices

A 6.78 MHz Maximum Efficiency Tracking Active Rectifier with Load Modulation Control for Wireless Power Transfer to Implantable Medical Devices

An Amplitude-Programmable Energy-Recycling High-Voltage Resonant Pulser for Battery-Powered Ultrasound Devices

A VHF Wide-Input Range CMOS Passive Rectifier With Active Bias Tuning

A 6.78 MHz, 95.0% Peak Efficiency Monolithic Two-Dimensional Calibrated Active Rectifier for Wirelessly Powered Implantable Biomedical Devices

A Bootstrapped Switch Based Efficient CMOS Full-Wave Active Rectifier for Biomedical Implants

A 13.56MHz Wireless Power Transfer System with Dual-Output Regulated Active Rectifier for Implantable Medical Devices

A Review of Power Management Integrated Circuits for Ultrasound-Based Energy Harvesting in Implantable Medical Devices

Modeling and Measurement of an Ultrasound Power Delivery System for Charging Implantable Devices Using an AlN-Based pMUT as Receiver

An efficient 13.56 MHz active back-telemetry rectifier in standard CMOS technology

An omnidirectional wireless power receiving IC with 93.6% efficiency CMOS rectifier and Skipping Booster for implantable bio-microsystems

A Miniaturized Low-Intensity Ultrasound Device for Wearable Medical Therapeutic Applications

A feed-forward controlled AC-DC boost converter for biomedical implants

An ultrasound-induced wireless power supply based on AlN piezoelectric micromachined ultrasonic transducers

A 13.56 MHz Efficient Active Rectifier with Quasi-Constant Delay Compensation Scheme for Implantable Medical Devices.

Single-stage Dual-Output AC-DC Converter for Wireless Power Transmission.

MEMS-based Ultrasonic Transducer As the Receiver for Wireless Power Supply of the Implantable Microdevices

A 13.56 MHz, 94.1% Peak Efficiency CMOS Active Rectifier with Adaptive Delay Time Control for Wireless Power Transmission Systems