Abstract:We are leveraging our existing success with anion exchange membranes (AEM) to develop new highly stable and highly conductive membranes and ionomers for AEM electrolysis. Our novel and scalable tri-block co-polymers ABA or BAB, where the A block can be functionalized with an advanced chemically stable cation and the B block is an unsaturated polymer that when hydrogenated results in high anion conduction membranes with exceptional mechanical strength and durability analogous to polyethylene (PE). We have also developed a novel immobilization technology for processable catalyst inks. Synergistically the A and B block lengths and chemistries are tuned to achieve all the properties desirable for an anion exchange membrane for electrolyzer applications. Random polymers of the same A and B chemistries can also be formulated for additional fidelity in chemically compatible ionomers for the membrane electrode assemblies (MEA). These systems are unique in that they achieve very high dissociation of anions beyond OH - , giving CO 3 2- σ60°C and 25 cm 2 cells. We have begun to understand the science behind ionomer catalyst interactions and initially used a commercial Ag nano-catalyst as a model system. Few ave studied the effect of ionomer chemistry and catalyst or catalyst type and loadings on performance. We have shown durability of > 600 h at 0.5 A cm -2 and continue to see improvements. It should be noted that the voltage is dropping in theses tests, at end of test at –ve 60 μV h -1 is achieved, while this may be interpreted as evidence of membrane thinning when the cell was dissembled the membrane thickness was ca. the same as at the beginning of test (80 μm), indicating slow, but long term conditioning, the cell did not reach the point at which a +ve degradation rate was observed. Further investigation of cell conditioning indicated that these cells currently take 40-50 hs under load to reach steady state operation (this break in time will be understood and significantly shortened) giving 400MV improvement at 1 A cm -2 . With a MnO 2 catalyst the voltage at 0.5 A cm -2 drops to 1.5 V indicating that the target of 2 A cm -2 at 1.8 V will be easily achieved with further investigation.

Enhancing the durability of anion exchange membrane water electrolysis cells via interfacial membrane–ionomer crosslinking

Novel Cross-Linked Anion Exchange Membranes with Diamines As Ionic Exchange Functional Groups and Crosslinking Groups

Dimensionally and oxidatively stable anion exchange membranes based on bication cross-linked poly(meta-terphenylene alkylene)s

Alkaline anion exchange membrane water electrolysis: Effects of electrolyte feed method and electrode binder content

Highly Water Resistant Anion Exchange Membrane for Fuel Cells.

Ionomer degradation in catalyst layers of anion exchange membrane fuel cells

Side-chain Manipulation of Poly (phenylene Oxide) Based Anion Exchange Membrane: Alkoxyl Extender Integrated with Flexible Spacer

Electrically Insulated Catalyst-Ionomer Anode Interfaces towards Durable Alkaline Membrane Electrolyzer

Reinforced Poly (dibenzyl-co-terphenyl piperidinium) Membranes for Highly Durable Anion-Exchange Membrane Water Electrolysis

Anion Exchange Membrane Crosslinked in the Easiest Way Stands out for Fuel Cells

A non-cationic crosslinking strategy to improve the performance of anion exchange membranes based on poly(aryl piperidinium) for fuel cells

Improvement the hydroxide conductivity and alkaline stability simultaneously of anion exchange membranes by changing quaternary ammonium and imidazole contents

Highly conductive and stable anion exchange membranes with dense flexible alkyl ether linkages and 1,2,4,5-tetramethylimidazolium for water electrolysis

Thermal Crosslinking of an Alkaline Anion Exchange Membrane Bearing Unsaturated Side Chains

Recyclable Cross-Linked Anion Exchange Membrane for Alkaline Fuel Cell Application

Bioinspired anion exchange membranes with dual steric cross-linking centers for industrial-scale water electrolysis

Hydrophilic Side Chain Assisting Continuous Ion-Conducting Channels for Anion Exchange Membranes

Preparation of Click-Driven Cross-Linked Anion Exchange Membranes with Low Water Uptake

Investigation of membranes-electrodes assemblies in anion exchange membrane fuel cells (AEMFCs): Influence of ionomer ratio in catalyst layers

Understanding How Anion Exchange Membranes and Cationic Polymer/Catalyst Interactions Behave with Time in Alkaline Electrolysis

Stable alkoxy chain enhanced anion exchange membrane and its fuel cell