Abstract:To improve the poor membrane-forming ability of polymer containing sterically-protected organic cations with the excellent alkaline stability, a series of robust and crosslinked poly(2,6-dimethyl-1,4-phenylene oxide)s (PPO) anion exchange membranes (AEMs) with bulky and chemically stable imidazolium cations was prepared by quaternization with C1,C3,C4-substituted imidazole and crosslinking reaction via "thiol-ene" chemistry. Compared to the uncrosslinked counterpart, the crosslinked AEMs showed excellent film-forming properties with the highest of tensile strength of 53.2 MPa, probably owing to the increased entanglement interactions in polymer chains that may in turn result in the controlled the water uptake and dimensional stability of the AEMs. Moreover, by using two different crosslinkers, water uptake of the resulting AEMs could be effectively tuned. The crosslinked AEM had a water uptake of 12.8 wt% with the ion exchange capacity (IEC) of 1.27 meq./g when using a hydrophilic dithiol as the crosslinker, which was almost twice than that for the membrane with hydrophobic crosslinker AEM (water uptake was 6.6 wt%, IEC = 1.28 meq./g). The higher water uptake further contributed to high ionic transport with bromide conductivity of 11.2 mS/cm at 20 degrees C in water and 24.8 mS/cm at 80 degrees C. The excellent alkaline stability of these materials was demonstrated by the fact that, more than 90.4% of bromide conductivity and 60.5% of tensile strength was retained after 1000 h immersion in 1 M NaOH at 80 degrees C, due to the presence of crosslinked networks and alkali-resistant sterically-protected imidazolium. Furthermore, we compared the AEM fuel cell performance and durability of the membrane electrode assembly (MEA) using the crosslinked and uncrosslinked bulky imidazolium-functionalized PPO copolymers as ionomers in catalyst layers. A higher peak power density of 200 mW/cm(2) at a current density of 475 mA/cm(2) and improved short-term durability (20.5 h) under a constant current density of 200 mA/cm(2) at 60 degrees C were obtained for the membrane electrode assembly with the crosslinked ionomer. These results suggest that crosslinking of anion conductive materials with stable sterically-protected organic cations is a facile and effective strategy to prepare the robust and alkaline stable AEMs for high-performance alkaline fuel cells.

Hydrophilic Side Chain Assisting Continuous Ion-Conducting Channels for Anion Exchange Membranes

A Mechanically Robust Anion Exchange Membrane with High Hydroxide Conductivity

Hydrophobic Side Chains to Enhance Hydroxide Conductivity and Physicochemical Stabilities of Side-Chain-type Polymer AEMs

Improvement the hydroxide conductivity and alkaline stability simultaneously of anion exchange membranes by changing quaternary ammonium and imidazole contents

Dual-cation Comb-Shaped Anion Exchange Membranes: Structure, Morphology and Properties

Physically and Chemically Stable Anion Exchange Membranes with Hydrogen-Bond Induced Ion Conducting Channels

Anion Exchange Membranes with Eight Flexible Side-Chain Cations for Improved Conductivity and Alkaline Stability

Side-chain Manipulation of Poly (phenylene Oxide) Based Anion Exchange Membrane: Alkoxyl Extender Integrated with Flexible Spacer

Enhanced Performance of Anion Exchange Membranes Via Crosslinking of Ion Cluster Regions for Fuel Cells

Design of pendent imidazolium side chain with flexible ether-containing spacer for alkaline anion exchange membrane

Boosting the performance of an anion exchange membrane by the formation of well-connected ion conducting channels

Highly Conductive and Dimensionally Stable Anion Exchange Membranes Based on Poly(dimethoxybenzene-co-methyl 4-Formylbenzoate) Ionomers

Dual Hydrophobic Modifications Toward Anion Exchange Membranes with Both High Ion Conductivity and Excellent Dimensional Stability

Enhancement of the Mechanical Properties of Anion Exchange Membranes with Bulky Imidazolium by "Thiol-Ene" Crosslinking

Anion Conductive Membrane Performance Facilitation Via Tethering Flexible with Rigid Backbones Using Oscillational Chain

Anion exchange membranes with branched ionic clusters for fuel cells

High Performance Anion Exchange Membranes with Confined Sub‐2‐nm Ion Channel

Enhancing Hydroxide Conductivity and Stability of Anion Exchange Membrane by Blending Quaternary Ammonium Functionalized Polymers

Highly conductive and stable anion exchange membranes with dense flexible alkyl ether linkages and 1,2,4,5-tetramethylimidazolium for water electrolysis

Flexible Cationic Side Chains for Enhancing the Hydroxide Ion Conductivity of Olefinic-Type Copolymer-Based Anion Exchange Membranes: an Experimental and Theoretical Study

Anion Exchange Membrane with a Novel Quaternized Ammonium Containing Long Ether Substituent