Abstract:To improve the poor membrane-forming ability of polymer containing sterically-protected organic cations with the excellent alkaline stability, a series of robust and crosslinked poly(2,6-dimethyl-1,4-phenylene oxide)s (PPO) anion exchange membranes (AEMs) with bulky and chemically stable imidazolium cations was prepared by quaternization with C1,C3,C4-substituted imidazole and crosslinking reaction via "thiol-ene" chemistry. Compared to the uncrosslinked counterpart, the crosslinked AEMs showed excellent film-forming properties with the highest of tensile strength of 53.2 MPa, probably owing to the increased entanglement interactions in polymer chains that may in turn result in the controlled the water uptake and dimensional stability of the AEMs. Moreover, by using two different crosslinkers, water uptake of the resulting AEMs could be effectively tuned. The crosslinked AEM had a water uptake of 12.8 wt% with the ion exchange capacity (IEC) of 1.27 meq./g when using a hydrophilic dithiol as the crosslinker, which was almost twice than that for the membrane with hydrophobic crosslinker AEM (water uptake was 6.6 wt%, IEC = 1.28 meq./g). The higher water uptake further contributed to high ionic transport with bromide conductivity of 11.2 mS/cm at 20 degrees C in water and 24.8 mS/cm at 80 degrees C. The excellent alkaline stability of these materials was demonstrated by the fact that, more than 90.4% of bromide conductivity and 60.5% of tensile strength was retained after 1000 h immersion in 1 M NaOH at 80 degrees C, due to the presence of crosslinked networks and alkali-resistant sterically-protected imidazolium. Furthermore, we compared the AEM fuel cell performance and durability of the membrane electrode assembly (MEA) using the crosslinked and uncrosslinked bulky imidazolium-functionalized PPO copolymers as ionomers in catalyst layers. A higher peak power density of 200 mW/cm(2) at a current density of 475 mA/cm(2) and improved short-term durability (20.5 h) under a constant current density of 200 mA/cm(2) at 60 degrees C were obtained for the membrane electrode assembly with the crosslinked ionomer. These results suggest that crosslinking of anion conductive materials with stable sterically-protected organic cations is a facile and effective strategy to prepare the robust and alkaline stable AEMs for high-performance alkaline fuel cells.

Side-chain Manipulation of Poly (phenylene Oxide) Based Anion Exchange Membrane: Alkoxyl Extender Integrated with Flexible Spacer

Preparation and properties of PPO-based anion exchange membranes with flexible side chains for fuel cells

Comb-shaped anion exchange membrane with segmented hydrophilic/hydrophobic side chain

Design of pendent imidazolium side chain with flexible ether-containing spacer for alkaline anion exchange membrane

Anion Conductive Membrane Performance Facilitation Via Tethering Flexible with Rigid Backbones Using Oscillational Chain

Stable alkoxy chain enhanced anion exchange membrane and its fuel cell

Hydrophobic Side Chains to Enhance Hydroxide Conductivity and Physicochemical Stabilities of Side-Chain-type Polymer AEMs

Tuning Polar Discrimination Between Side Chains to Improve the Performance of Anion Exchange Membranes

Dual-Side-Chain-Grafted Poly(phenylene oxide) Anion Exchange Membranes for Fuel-Cell and Electrodialysis Applications

Enhancement of the Mechanical Properties of Anion Exchange Membranes with Bulky Imidazolium by "Thiol-Ene" Crosslinking

Crucial role of side-chain functionality in anion exchange membranes: Properties and alkaline fuel cell performance

Hydrophilic Side Chain Assisting Continuous Ion-Conducting Channels for Anion Exchange Membranes

Highly Stable Electron-Withdrawing C=O Link-Free Backbone with Branched Cationic Side Chain As Anion Exchange Membrane

Boosting the performance of an anion exchange membrane by the formation of well-connected ion conducting channels

Enhanced Performance and Stability of Poly(carbazole)-Based Anion Exchange Membranes via Synergistic Dual Side Chains for Fuel Cell Applications

Comb-shaped Anion Exchange Membrane with Densely Grafted Short Chains or Loosely Grafted Long Chains?

Highly Conductive Anion Exchange Membranes with Long Flexible Multication Spacer

Complementary side chain promotes microphase separation in the membranes for alkali fuel cells

Highly Conductive and Robustly Stable Anion Exchange Membranes with a Star-Branched Crosslinking Structure

Octopus-like side chain grafted poly(arylene piperidinium) membranes for fuel cell application

Anion Exchange Membranes with Dense N-spirocyclic Cations As Side-Chain