Abstract:Micro-electro-mechanic-system (MEMS) devices on flexible substrate are important for non-planar and non-rigid surface applications. In this paper, a novel and cost-effective fabrication process for an 8×8 MEMS temperature sensor array with a lateral dimension of 2.5mm×5.5mm on a polyimide flexible substrate is developed. A 40μm thick polyimide substrate is formed on a rigid silicon wafer using as a mechanical carrier throughout the fabrication by four successive spin coating liquid polyimide. The arrayed temperature sensing elements made of 1200Å sputtered platinum thin film on polyimide substrate show excellent linearity with a temperature coefficient of resistance of 0.0028/°C. The purposed sensor obtains a high sensitivity of 0.781Ω/°C at 8mA at constant drive current. Because of the low heat capacity and excellent thermal isolation, the temperature sensing element shows excellent high sensitivity and a fast thermal response. The finished devices are flexible enough to be folded and twisted achieving any desired shape and form. Employing spin-coated liquid polyimide substrate instead of solid polyimide sheet minimizes the thermal cycling as well as improves the production yield. This fabrication technique first introduces the spin-coated PDMS (Polydimethylsiloxane) interlayer between the silicon carrier and the polyimide substrate and makes the polyimide-based devices separate much easier and greatly simplifies the fabrication process with a high production yield. A non-successive two-stage cure procedure for the polyimide precursor is developed to meet low-temperature requirement of the PDMS interlayer. The fabrication procedure developed in this research is compatible with conventional MEMS technology through an optimized integration process. The novel flexible MEMS technology can benefit the development of other new flexible polyimide-based devices.

Temperature Sensor in a Flexible Substrate

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A Temperature Sensor Array Based on Flexible MEMS Skin Technology

Key Technology of Micromachined Temperature Sensor Arrays on Polyimide Flexible Substrates

A cost-effective flexible MEMS technique for temperature sensing

Flexible Thermal Sensor Array for Wall Shear Stress Measurements

A temperature sensor based on flexible substrate with ultra-high sensitivity for low temperature measurement

A Flexible Temperature Sensor Array with Polyaniline/Graphene–Polyvinyl Butyral Thin Film

A Novel Fabrication Process of MEMS Devices on Polyimide Flexible Substrates

Flexible thermal sensor array on PI film substrate for underwater applications

Flexible Implantable Microtemperature Sensor Fabricated on Polymer Capillary by Programmable UV Lithography with Multilayer Alignment for Biomedical Applications

Fabrication of Flexible Thermal Thin-film Sensor Array

Study on the Characteristics of Thermo-Electrodes of Various Deposition Parameters for the Flexible Temperature Sensor.

High-Performance Temperature Sensor by Employing Screen Printing Technology

Development of Flexible Nickel Thermal Sensor Array

High-sensitive Flexible Temperature Sensor with PEDOT:PSS Composites and PI Substrate for Human Body Monitoring

Flexible Temperature Sensor Array Based on a Graphite-Polydimethylsiloxane Composite

A High‐Performances Flexible Temperature Sensor Composed of Polyethyleneimine/Reduced Graphene Oxide Bilayer for Real‐Time Monitoring

A thin-film temperature sensor based on a flexible electrode and substrate

Highly Linear and Stable Flexible Temperature Sensors Based on Laser‐Induced Carbonization of Polyimide Substrates for Personal Mobile Monitoring

Highly sensitive and transparent flexible temperature sensor based on nematic liquid crystals