Abstract:3D monolithic integration of logic and memory devices has emerged as one of the key enablers for next-generation electronic devices to address the ever-increasing demand for higher integration density, better performance and energy efficiency. BEOL-compatible oxide semiconductors show great potential to revolutionize the field thanks to their unique properties [1]. We present our recent advancement related to BEOL-compatible oxide semiconductors for logic and memory applications. The digital-etch-enabled nanowire transistors and α -IGZO-based eDRAM will first be discussed, followed by the ferroelectric (FE) memories with high performance and novel structures utilizing α -IGZO or ALD-deposited ZnO as the channel. Ultra-scaled amorphous IGZO ( α -IGZO) nanowire field-effect transistors (NW-FETs) hold great potential for applications demanding high performance and integration density. To realize the fabrication of high-quality and aggressively-scaled nanowire structures, a novel digital etching method for amorphous α -IGZO materials has been proposed and demonstrated [2]. Confirmed by the SEM images of an α -IGZO nanowire before and after digital etching, a notable nanowire width W NW reduction can be observed. We have the thinnest α -IGZO nanowire achieved by the digital etching with a W NW of approximately 20 nm. By further developing the transistor upon the nanowire, the α -IGZO NW-FET attains a good subthreshold swing (SS) of 80 mV/decade and a high peak extrinsic transconductance ( G m, ext ) of 612 μS/μm at V DS of 2 V (456 μS/μm at V DS = 1 V). Compared to the previous studies, our IGZO NW-FET achieves one of the highest peak G m values among all IGZO-based FETs. Besides the BEOL compatibility and high on-current, ultra-low subthreshold leakage makes α -IGZO FETs extremely promising for eDRAM. We further investigated the potential of α -IGZO eDRAM by developing the charge-domain compute-in-memory (CiM) [3]. Experiments have demonstrated small SS, large on-state current, and long-time charge retention with our dedicated 4T1C memory cell. With differential cell structure, an even higher tolerance for charge loss can be attained. With experiment-calibrated benchmarking in the VGG-8 network for CIFAR-10 image classification tasks, 2092 TOPS/W power efficiency for the CiM core can be expected, outperforming the prior TFT and CMOS-based CiM approaches, exhibiting significant advantages for ultra-low-power applications. The integration of doped-HfO 2 FE material and oxide semiconductor, both BEOL-compatible with large-scale and cost-effective deposition, presents a promising avenue for advancing data storage in the future. We have developed the high-performance α -IGZO Fe-FET with a metal-ferroelectric-metal-oxide-semiconductor (MFMIS) structure as well as the Fe TCAM [4]. The α -IGZO Fe-FET achieves a large memory window of ~3 V with high reliability, while the Fe TCAM reduces the transistor number from 16 to 2 compared to the traditional SRAM-based one. Besides α -IGZO, we believe that ALD-based oxide semiconductors featuring high controllability of film thickness and conformal coverage of the 3D structures can create new opportunities for novel device structure and integration. The fin-gate ZnO Fe-FET stands for a great example while not only outstanding device performance but also suppressed device-to-device variation due to the unique structure have been demonstrated, holding tremendous promise for high-density 3D integration [5]. Acknowledgments: This work is supported by Singapore Ministry of Education (Tier 2: MOE2018-T2-2-154, Tier 1: R-263-000-D65-114). References : [1] S. Dutta et al. , IEDM, p. 36.4., 2020. [2] K. Han et al. , VLSI , 2021, p. T10-1. [3] J. Liu et al. , IEDM , 2021, p. 46.2. [4] C. Sun et al. , VLSI , 2021, p. T7-4. [5] Q. Kong et al. , IEDM , 2022, p. 12.3.

Design Guidelines for Oxide Semiconductor Gain Cell Memory on a Logic Platform

A Dual Core Oxide 8T SRAM Cell with Low Vccmin and Dual Voltage Supplies in 45nm Triple Gate Oxide and Multi Vt CMOS for Very High Performance Yet Low Leakage Mobile SoC Applications

Area-and Power-Efficient Compute-in-Memory Macro Based on Oxide Semiconductor 2T0C Edram with Cell-System Co-Optimization

A Semi-Floating Gate Memory Based on SOI Substrate by TCAD Simulation

(Invited) BEOL-Compatible Oxide Semiconductor Logic and Memory Devices

Access Transistor Design And Optimization For 65/45nm High Performance Soi Edram

High Performance 2T0C DRAM Cells Based on Atomic-Layer-deposited InAlZnO FETs

High-Performance Logic and Memory Devices Based on a Dual-Gated MoS2 Architecture

A 6T-SRAM-Based Computing-In-Memory Architecture using 22nm FD-SOI Device

A logic 2T gain cell eDRAM with enhanced retention and fast write scheme

Hybrid Integration of Gate-All-Around Stacked Si Nanosheet FET and Si/SiGe Super-Lattice FinFET to Optimize 6T-SRAM for N3 Node and Beyond

CMOS backend-of-line compatible memory array and logic circuitries enabled by high performance atomic layer deposited ZnO thin-film transistor

High Performance Si-MoS2 Heterogeneous Embedded DRAM

SRAM Cell Design Challenges in Modern Deep Sub-Micron Technologies: An Overview

Novel Silicon-Based Flash Cell Structures for Low Power and High Density Memory Applications

Design of power efficient and reliable hybrid inverter approach based 11 T SRAM design using GNRFET technology

True Nonvolatile High‐speed DRAM Cells Using Tailored Ultrathin IGZO

Optimized IGZO FETs for Capacitorless DRAM with Retention of 10 Ks at RT and 7 Ks at 85 °C at Zero Vhold with Sub-10 Ns Speed and 3-Bit Operation

A SOI Based Dopant-Free MOSFET for Logic and Memory Application

15.3 A 351TOPS/W and 372.4GOPS Compute-in-Memory SRAM Macro in 7nm FinFET CMOS for Machine-Learning Applications

Multifunctional Logic‐in‐Memory Cell Based on Wafer‐Scale MoS2 Thin Films Prepared by Atomic Layer Deposition