Abstract:The passive safety commercial pressurized water reactors (PWRs), AP1000 and CAP1400 are equipped with the automatic depressurization system (ADS). The fourth stage of ADS (ADS-4) has the largest discharging capacity among the all ADS stages. During a small break loss-of-coolant accident (SBLOCA), only when the system is fully depressurized by the ADS-4 to near the containment atmospheric pressure, the in-containment refueling water storage tank (IRWST) can deliver the large coolant inventory for the long-term core cooling by its water head. Before the IRWST injection, the core reaches its minimum inventory. So the transition from the ADS-4 depressurization to the IRWST injection is a very challenging period in a SBLOCA. Therefore, to evaluate the passive system performance by the integral effect test (IET), the transition must be simulated properly. This work conducted the scaling analysis for the ADS-4 depressurization and the IRWST injection for designing the related components of the ACME IET facility. A uniform scaling law based on the existing T-branch liquid entrainment models was proposed. For scaling the onset of the IRWST injection, the requirement for reproducing the synergetic effect in an IET was introduced in order to preserve the important event/process occurrence time with the proper conditions, and the scaling laws for the full pressure IRWST injection were obtained. For investigating the transition thermal hydraulic behaviors and the ADS-4 configuration influences on the core safety, one cold leg break test and three double-ended direct-vessel-injection (DEDVI) line break tests with the different ADS-4 failure modes were selected from the ACME SBLOCA test matrix, and the main test data related to the core safety were analyzed and compared. It was found that the ADS-4 actuation significantly accelerated the system depressurization but worsened the core inventory depletion at the same time. In addition, the break condition and the ADS-4 failure mode could differently affect the system depressurization and the core level. The ACC injection during the ADS-4 depressurization in DEDVI was critical for the core level makeup. The insufficient ADS-4 venting capacity delayed IRWST injection, but also mitigated the core inventory depletion. It suggests the ADS-4 design can be potentially optimized in the passive safety system design. (C) 2019 Elsevier Ltd. All rights reserved.

Large pipe break opening time in pressurized heavy water reactors

Comprehensive Safety Analysis Code System for Nuclear Fusion Reactors III: Ex-Vessel LOCA Analyses Considering Passive Safety

Highly detailed structural integrity assessment of the reactor pressure vessel nozzle of Atucha-I during a pressurized thermal shock event

Research on Compliance Between Large Break LOCA of HPR1000 and New LOCA Acceptance Criterion 10Cfr50.46c

Demonstration of Structural Integrity of Boiling Water Reactor Pressure Vessels under Ultimate Response Guideline Operation

Thermohydraulic Analysis of Accident Scenarios of a Fusion DEMO Reactor Based on Water-Cooled Ceramic Breeder Blanket: Analysis of LOCAs and LOVA

Water-Ingress Accident of the 250mw Pebble-Bed Modular High Temperature Gas-Cooled Reactor

Analyses for Passive Safety of Fusion-Reactor During Ex-Vessel Loss-Of-Coolant Accident

Demonstration of the E-BEPU methodology for SL-LOCA in a Gen-III PWR reactor

Analysis on blow-down transient in water ingress accident of high temperature gas-cooled reactor

Safety Analysis in VVER-1000 Due to Large-Break Loss-of-Coolant Accident and Station Blackout Transient Using RELAP5/SCDAPSIM/MOD3.5

Simulation of VVER-1000 Guillotine Large Break Loss of Coolant Accident Using RELAP5/SCDAPSIM/MOD3.5

Analysis of AP1000 Containment Passive Cooling System During a Loss-of-coolant Accident

Experimental Investigation of Early Initiation of Primary Cooldown by Secondary-Side Depressurization in A Pwr Inadequate Core-Cooling Accident

Scaling and Integral Effect Test on Transition from Depressurization to Long-Term Gravity Injection

Experimental study on flow break by nuclear heating reactor LOCA under shutting down incompletely

Multi-scale coupling analysis of the flow blockage accident in the typical LFR

Investigation of pressure and temperature variations and flow pattern evolution during pressurized water injected into lead-bismuth eutectic

Force and moment analysis of pipe system for double end break loss of coolant accident in primary loop of PWR

Failure simulation of nuclear pressure vessel under LBLOCA scenarios

Large Thermal Gradients on Structural Integrity of a Reactor Pressure Vessel Subjected to Pressurized Thermal Shocks