Abstract:Pressurized water reactors (PWRs) are employed worldwide and continue to expand in capacity. They require thorough investigation, particularly concerning their safety and operational efficiency. To ensure these factors, comprehensive research into their various components and an understanding of the diverse phenomena they experience within a PWR are imperative. These phenomena can be of mechanical, thermal, hydraulic, or neutronic nature. Among these components, fuel assemblies (FAs) hold a main role in PWRs. The intricate interplay of these physical factors results in the modification of FAs geometry, specifically permanent elongation and lateral deformations referred to as irradiation creep. The earliest reported occurrence of these deformations dates back to 1994 in Ringhals reactors, where various FAs exhibited distinct deformations (Andersson et al., 2005). Given that these phenomena occur over a time span of months to years in metallic materials, conducting investigations within the confines of a typical laboratory observation period becomes impractical. Consequently, this project proposes an alternative experimental methodology to overcome this challenge, thus gaining a deeper understanding of the fluency phenomenology in FAs behavior. This methodology consists on the design of a reduced-scale test section, capable of replicating the fluid–structure interaction (FSI) responsible for creep, the creation of spacer grids through 3D printing technology, and selection of the appropriate material for the fuel rods (FRs), with an emphasis on macroscopic coupling effects, rather than focusing into the micro-structural response of the material. To experimentally observe the deformation on the FAs, cameras were used to capture images through the time during the test, to catch the displacement of the FRs. The first results showed the mock-up was able to reproduce the FSI causing the creep on the FAs, it was possible to capture the displacement evolution along time, and to observe different types of deformation, thus, it helps to understand the phenomenon. Further tests and investigations using laser doppler velocimetry (LDV) technique to analyze the flow will be held, to a better comprehension of these burden.

Highly detailed structural integrity assessment of the reactor pressure vessel nozzle of Atucha-I during a pressurized thermal shock event

Correlating microstructure and mechanical properties of harvested high dose Zorita light water reactor internals

Thermo-Mechanical Analysis of Instrumentation Guide Tube Failure During a Severe Accident in a Nordic Boiling Water Reactor

Large Thermal Gradients on Structural Integrity of a Reactor Pressure Vessel Subjected to Pressurized Thermal Shocks

Loading Condition Evaluation for Structural Integrity Assessment of RPV Due to PTS Event Based on Three-Dimensional Thermal-Hydraulics and Structural Analyses

Large pipe break opening time in pressurized heavy water reactors

Failure simulation of nuclear pressure vessel under LBLOCA scenarios

Effect of Coolant Water Temperature of Emergency Core Cooling System on Failure Probability of Reactor Pressure Vessel

Plasticity Correction on Stress Intensity Factor Evaluation for Underclad Cracks in Reactor Pressure Vessels

Structural integrity assessment of CANDU pressure tubes using Sobol indices for global sensitivity analysis

Influence Evaluation of Loading Conditions During Pressurized Thermal Shock Transients Based on Thermal-Hydraulics and Structural Analyses

Effect of Coolant Water Temperature of ECCS on Failure Probability of RPV

(Digital Presentation) Cooperative Radial Corrosion- and Pressure-Assisted Stress Buildup in High Pressure Pipes

Fracture Studies on Cruciform Bend Specimens of Pressure Vessel Steel subjected to Thermo-mechanical Loading

Application of Flaw Updating Process on Probabilistic Integrity Analysis for a Reactor Pressure Vessel Subjected to Pressurized Thermal Shocks

Application Of Flaw Updating Process On Probabilistic Structural Evaluation For A Reactor Pressure Vessel Under Pressurized Thermal Shocks

Evaluation of RPV closure head penetration integrity considering fitting and residual stresses

Leakage and loss of contact/adjustment effects on slip-joins of a jet-pump assembly of BWR nuclear reactors by dynamic fluid-structure interaction modelling

Finite Element Analysis of the Main Reactor Vessel in the China Initiative Accelerator Driven System

Mock-up conception for experimentally investigate the creep phenomenon caused by the fluid–structure interaction in a rod bundle

A Blowdown Critical Heat Flux Experimental Vehicle