A comparative Monte Carlo simulation study on shielding features of the CaF2–CaO–B2O3–P2O5–SrO–Ta2O5 glass system against X-ray by GEANT4 and MCNPX codes

Farzad Isazadeh,Akbar Abdi Saray

DOI: https://doi.org/10.1038/s41598-024-64096-3

IF: 4.6

2024-06-13

Scientific Reports

Abstract:Regarding to their unique physical and mechanical features, glasses and glass–ceramics are suitable materials for shielding purposes. The present study evaluates the shielding properties of the CaF 2 –CaO–B 2 O 3 –P 2 O 5 –SrO–Ta 2 O 5 glass system using Monte Carlo GEANT4 and MCNPX codes for X-ray radiations with an energy range of 20 to 100 keV. MAC values of the Ta 0 , Ta 1 , Ta 2 , Ta 2.5 , and Ta 3 samples of the CaF 2 –CaO–B 2 O 3 –P 2 O 5 –SrO–Ta 2 O 5 glass were computed using Phy-X/PSD, GEANT4, and MCNPX codes and compared. According to the results, the programs have good compatibility with each other. For instance, in the energy of 40 keV and for the Ta 2 sample, GEANT4 and MCNP codes are 1.445765406 and 1.517801204 cm 2 /g, respectively, indicating 7.419529525 and 2.829628418% differences with 1.562 cm 2 /g obtained using the Phy-X/PSD software. According to recent estimations, the Ta 3 sample of the CaF 2 –CaO–B 2 O 3 –P 2 O 5 –SrO–Ta 2 O 5 glass system can be selected as the best shield compared with the other samples.

multidisciplinary sciences

What problem does this paper attempt to address?

This paper aims to study the shielding performance of the CaF2–CaO–B2O3–P2O5–SrO–Ta2O5 glass system under X-ray radiation. Specifically, the paper uses Monte Carlo simulation software GEANT4 and MCNPX to calculate parameters such as the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), half-value layer (HVL), and tenth-value layer (TVL) of this glass system, and compares the performance of these parameters in samples with different Ta2O5 content.

The main objectives include:
1. **Evaluate shielding performance**: By calculating parameters such as the attenuation coefficients of samples with different Ta2O5 content, evaluate the effectiveness of these samples as X-ray shielding materials.
2. **Compare simulation results**: Conduct comparative analysis of the results calculated using GEANT4, MCNPX, and Phy-X/PSD software to verify the consistency among these software.
3. **Determine the best sample**: Based on the simulation results, select the sample with the best shielding performance. The study found that the Ta3 sample has the highest density and the best shielding effect.

In summary, the main purpose of this paper is to determine which sample in the CaF2–CaO–B2O3–P2O5–SrO–Ta2O5 glass system is most suitable for use as an X-ray shielding material through detailed simulation experiments.