Abstract:Lead borate glass is the best radiation shielding glass when lead is in high concentration. However, it has low transparency after radiation exposure. Radiation decreases transparency due to chemical and physical changes in the glass matrix, such as creating or healing defects in the glass network. The addition of rare earth elements like cerium and dysprosium oxides to lead borate glasses can improve their transparency and durability as radiation shielding barriers. The newly manufactured glasses' optical absorption, structural, and radiation shielding properties were measured. The optical characteristics of the generated samples were examined to determine the effect of the cerium/dysprosium ratio on the structural alterations, specifically in the presence of bridging oxygen (BO) and non-bridging oxygen (NBO). Incorporating Ce 3+ results in peaks at 195 nm for borate units, 225 nm for Ce 3+ , and a broadened peak at 393 nm due to overlapping peaks for Ce 3+ and Ce 4+ in the UV region. By adding Dy, multiple peaks are observed at 825, 902, 1095, 1275, and 1684 nm, corresponding to the transition from 6 H 15/2 ground state to 6 F 5/2 , 6 F 7/2 , 6 F 9/2 , 6 F 11/2 , and 6 H 11/2 . The samples were also tested before and after exposure to gamma irradiation from a 60 Co source at a dose of 75 kGy to assess their stability against radiation. The energy gap value during irradiation shows decreased non-bridging oxygen. The energy gap difference before and after irradiation for the M4 sample shows higher NBO to BO conversion, reducing radiation damage and improving structural stability. Furthermore, X-ray photoelectron spectroscopy was utilized to get insight into the coordination chemistry of the created glass samples. The half-value layer (HVL), radiation protection efficiency (RPE), neutron removal cross-section (FRNCS), mean free path (MFP), mass attenuation coefficients (MAC), and effective atomic numbers (Z ef ) of the glassy structure were calculated theoretically to assess its radiation shielding qualities. The linear attenuation coefficient order for the prepared samples was M1 > M2 > M3 > M4. The FRNCS values were 0.090, 0.083, 0.081, and 0.079 cm −1 for samples M1, M2, M3, and M4, respectively.

Gamma-ray shielding evaluation of highly-dense PBSCCx-glasses: experimental and simulation study

Computation of gamma-ray buildup factors for (25-x)CaF2-xAl2O3–15Bi2O3–59B2O3–CuO glasses

CeO2-doped silicate glass: material characterization and protective properties for γ-ray shielding applications

Enhancing Radiation Shielding with Gadolinium(III) Oxide in Cerium(III) Fluoride‐Doped Silica Borate Glass

PbO–Sb2O3–B2O3–CuO glassy system: Evaluation of optical, gamma and neutron shielding properties

Comprehensive study for radiation shielding features for Bi2O3-B2O3-ZnO composite using computational radioanalytical Phy-X/PSD, MCNP5, and SRIM software

SrO–ZnO–PbO–B 2 O 3 glassy insights: Unveiling the structural and optical features for gamma ray shielding efficacy

Enhanced optical and structural traits of irradiated lead borate glasses via Ce3+ and Dy3+ ions with studying Radiation shielding performance

Synthesis and Gamma-ray Shielding Efficiency of Borosilicate Glasses Doped with Zinc Oxide: Comparative Study

Gamma and neutron attenuation of SiO 2 –B 2 O 3 –BaO–Li 2 O glasses doped with CeO 2

Exploring Gamma Radiation Shielding: the Role of BaO in Borosilicate Glasses

Experimental examination on physical and radiation shielding features of boro-silicate glasses doped with varying amounts of BaO

Experimental study of the ionizing gamma-rays shielding capability for MgO-PbO-SiO2-B2O3-BaO glass systems

Radiation shielding characteristics of PbO–BaO–B2O3–ZnO glass system against gamma rays: experimental study

Fabrication and characterization of different PbO borate glass systems as radiation-shielding containers

Designing High-Density of PbO-Enriched Telluro-Borate Glasses for Improved Radiation Shielding: A Comprehensive Study of Attenuation Parameters

Gamma shielding performance of B2O3/BaO-based glassy system: Synthesis and simulation study

Understanding radiation shielding performance through a comparative study of half value layer in novel and preexisting silicate glasses

Enhancing radiation shielding effectiveness: a comparative study of barium-doped tellurite glasses for gamma and neutron radiation protection

Lithium magnesium borosilicate glass: the impact of alternate doping with nano copper oxide and nano hematite on its structural, optical, and nuclear radiation shielding characteristics

Radiation attenuation of boro-tellurite glasses for efficient shielding applications