Abstract:As a transformer main protection, gas protection is an important and traditional non-electricity protection. For internal faults of transformer, gas protection can directly response to non-electricity characteristic such as oil flow velocity, and then has higher sensitivity and reliability compared with electric protection in principle. However, for external faults, great electromagnetic force and losses of windings, which caused by the heavy through currents, may result in maloperation of gas relay. Thus the reliability of the gas protection is low. From statistical data analysis of several gas protection maloperation accidents happened in recent years, it is clear that the root reasons of low reliability of gas protection should be outdated protective principle and inaccurate threshold value. In order to analyze the mechanism of gas protection mal-operation and provide a proper method to set the threshold value of gas protection, the transient process and the related physics essence of gas protection mal-operation resulted from external fault is analyzed. In the process of external short circuit, electromagnetic force of windings caused by short-circuit impulse current is so huge that the whole windings will generate intense vibration. Meanwhile, insulating oil in transformer will rush into the oil tube by squeezing and shaking, which lead to gas protection mal-operation eventually. From the above analysis, it is illustrated that the process of gas protection mal-operation caused by external short circuit is a multi-physical field coupled process. To simulate the complicated process veritably and accurately, an oil transformer model based on multi-physics field is established in ANSYS Workbench. Firstly, the short circuit electromagnetic force of windings is calculated via the magnetic field analysis, which will be loaded into the dynamic mechanical analysis of windings. Thus stress distribution and strain characteristics, which can describe vibration of windings- is calculated and loaded into the flow field analysis over a defined interface. Eventually, the oil flow velocity through gas relay in the oil tube is achieved by a hydrodynamic model. Simulations with different external fault current are conducted to study the relationship between the oil flow velocity and external fault current in the windings. The results show that factors which affect the oil flow velocity is different between internal fault and external fault, and there exists the obvious distinction of the oil flow velocity between internal fault and external fault. Furthermore, the oil flow velocity of transformer under fault conditions can be obtained in the above simulation more veritably and accurate, which can be used as references for the threshold value of gas relay. The purpose of this study is to overcome the difficulties in setting threshold value, avoid the gas protection misoperation during external short circuit and improve the reliability of gas protection.

Dynamic Self Checking Technology of Transformer Device in Intelligent Power Plant Based on Protection Logic Optimization

Power Transformer Digital Protection Based on Internal Pressure Characteristics

Dynamic Electromagnetic Force Analysis of a Power Transformer with Regulated Windings

A Transformer Protection Scheme Based on the Deep Forest Algorithm

A method of adaptive transformer turn-turn fault protection based on power loss

ANALYSIS AND COUNTERMEASURE FOR MISOPERATION OF LONGITUDINAL DIFFERENTIAL PROTECTION WITH UNCLEAR REASON

A Novel Digital Non-Electrical Protection for Power Transformer Based on Internal Pressure Characteristics

Transformer Inter-Turn Faults Detection by Dynamic State Estimation Method

Internal Fault Analysis and Optimization Design of Main Protection Scheme for Large Condenser

Transformer Multi-Feature Intelligence Protection Principle Based on BP Neural Network

Pre-diagnosis Technology for Short-Circuit Withstand Capability of Distribution Transformer Based on Big Data

Development of an Intelligentized and MicrocomputizedTransformer Protection Device

Internal Fault Analysis and Optimization Design of Main Protection Scheme for Shanghai Electric Phase Modifier

Dynamic pressure analysis and protection of transformer in internal arcing fault by FEM

New Development of Protection Technique for Electric Main Equipment

Deep Learning-Based Algorithm for Internal Fault Detection of Power Transformers during Inrush Current at Distribution Substations

The Simulation and Analysis on Transformer Gas Protection Maloperation Based on Multiple Physical Fields Coupling

Analysis of Converter Transformer Protection Reformation and Research of Testing Technology

Diagnostic Research for the Failure of Electrical Transformer Winding Based on Digital Twin Technology

Inter-Turn Breakdown Fault Analysis and Winding Structure Optimisation of Winding of Dry-Type Transformers in Wind Farms

Industrial Computer Control System for Testing Transformer