Abstract:In response to the call for environment protection, more and more researches have been finding new alternative refrigerants which are of zero Ozone depleting potential (ODP), low global warming potential (GWP) and will be efficient, inflammable, and nontoxic to replace the HCFCs and HFCs refrigerants. Non-azeotropic mixtures of suitable fluids are becoming the important candidates of that search race. In this paper, the flow and heat transfer performance of CO2-DME (dimethyl ether) mixture refrigerants at 8.0 MPa in a horizontal tube was numerically investigated. In particular, this work has been focused upon the laminar heat transfer characteristics of CO2-DME mixture refrigerant flow with Reynolds number ranging from 180 to 1800 and the mass fraction of DME ranging from 21% to 39%. The results show that the heat transfer performance of the mixture fluid can be improved when the mass fraction of DME increases to 30%. Considering both the best heat transfer performance and the safety, the optimum component of CO2-DME (70/30, mass%) has been found in this study. And the mechanisms that are responsible for the heat transfer enhancement are obtained and they are: (1) The temperature gradient of CO2-DME mixture fluid with high mass fraction of DME is larger than that of CO2-DME mixture fluid with low mass fraction of DME; in addition, the temperature gradient increases with the mass fraction of DME; (2) The increase of thermal conductivity for CO2-DME mixtures can enhance the heat transfer performance to a large extent. (3) The self-acceleration characteristic of the supercritical mixture fluid is also beneficial to the heat transfer enhancement. Furthermore, it is found that the heat transfer performance of the mixture fluid can also be improved with Reynolds number. The viscous boundary layer of the fluid becomes thinner when the Reynolds number increases, which leads to an enhancement in heat transfer. In addition, at high Reynolds number, the flow is tend to be turbulent, which is beneficial to the heat transfer performance of mixture fluid. With regard to the flow characteristic of mixtures, first the flowing changes depend on the temperature and the density of fluid to a large extent-the high value of velocity can occur when the fluid has a high temperature and a low density. And secondly, the supercritical CO2-DME mixtures speed up along the tube and make themselves different with water flow. These results of this study have significant implications for the design of high-performance heat exchangers, using CO2-DME mixture as the working fluid.

Numerical study on the influence of the mixing chamber structure in a dilution refrigerator on the heat and mass transfer characteristics of 3 He- 4 He at ultralow temperatures

Study on heat and mass transfer characteristics of 3He-4He at extremely low temperatures in mixing chamber of dilution refrigeration

Regulation strategy and analysis of the ultra-low temperature heat and mass transfer capacity of 3 He- 4 He mixture in the mixing chamber of dilution refrigerator

Investigating the Thermal-Hydraulic Performance of New Refrigerant Mixtures Through Numerical Simulation of Minichannel and Microchannel Evaporators

Experimental and numerical study of a condensation-driven dilution refrigerator

Study on the Performance of a Novel Waste Heat Recovery System at Low Temperatures

Can the Numerical Simulations of Melting in a Differentially-Heated Rectangular Cavity Be Rationally Reduced to 2D? A Comparative Study Between 2D and 3D Simulation Results

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

THE INFLUENCE OF NON-IDEAL EFFECTS OF ACTUATING MEDIUM ON THE PERFORMANCE OF A PLASTIC CRYOCOOLER

Performance optimization of a mK dilution refrigerator based on the first law of thermodynamics

Dilution Refrigeration Technology

Dilution refrigerator and its heat transfer problems

Experimental study on a dry dilution refrigerator driven by a high-power linear compressor

Experimental investigation on pulse tube refrigerator with binary mixtures

A Numerical Study on Heat Transfer Characteristics of CO2-DME Mixture Fluid

Influence of He-H2 mixture proportion on the performance of pulse tube refrigerator

Numerical investigation of a condensation-driven dilution refrigerator

Investigations on the throttling process of 3 He in a dilution refrigerator used for cooling superconducting quantum chips

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

Dry Dilution Refrigerator for Experiments on Quantum Effects in the Microwave Regime

Achieving ultralow temperatures by classical He3-He4 dilution refrigeration