Abstract:Aiming for the application of refrigerant two-phase cooling on battery thermal management, this study presented an experimental investigation on the flow boiling characteristics of R1233zd(E) in a parallel mini-channel heat sink, which consisted of 21 channels with the length of 140 mm and the cross section of 1.5 x 1.5 mm(2). Under the saturation pressure of 125 kPa, the boiling curve of R1233zd(E) and the heat transfer coefficient were analyzed under different heat fluxes (5-100 kW/m(2)), mass fluxes (150-600 kg/m(2) s) and inlet subcoolings (2.5-8 K). In addition, the flow pattern was captured using high-speed camera. The results showed that the onset of nucleate boiling was delayed with the increase of refrigerant mass flux and inlet subcooling, while the transition of heat transfer was verified by flow pattern visualization. The measured wall superheat was compared with present correlations, showing that the predicted value was always smaller than the experimental results. Flow boiling on local points showed that the nucleate boiling was triggered later at the channel located at the center axis of the heat sink, meanwhile the approach of critical heat flux was more obvious at channel outlet. Due to the graduate transition of flow boiling mechanism, refrigerant mass flux had limited influence on the local heat transfer coefficient when the heat flux was lower than 30 kW/m(2), while enhancement on heat transfer could be observed with larger mass flux when the heat flux exceeded 30 kW/m(2). The local experimental data of heat transfer coefficient were compared with 6 correlations from the literatures. It was found that the best prediction was presented by Liu and Winterton model with a MAE of 23.4%, while Kim and Mudawar model showed best agreement under different mass fluxes. A simple modification was conducted on Kim and Mudawar model, and the calibrated model presented a better prediction accuracy with the MAE of 17.6% and 83.2% of total data within the error of +/- 30%. (C) 2021 Elsevier Ltd. All rights reserved.

Regulation strategy and analysis of the ultra-low temperature heat and mass transfer capacity of 3 He- 4 He mixture in the mixing chamber of dilution refrigerator

Numerical study on the influence of the mixing chamber structure in a dilution refrigerator on the heat and mass transfer characteristics of 3 He- 4 He at ultralow temperatures

Study on heat and mass transfer characteristics of 3He-4He at extremely low temperatures in mixing chamber of dilution refrigeration

Performance optimization of a mK dilution refrigerator based on the first law of thermodynamics

Study on the Performance of a Novel Waste Heat Recovery System at Low Temperatures

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

Preliminary study on the performance of the diffusion absorption refrigerator operating with the mixed refrigerant

Experimental and numerical study of a condensation-driven dilution refrigerator

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Dilution refrigerator and its heat transfer problems

Experimental Investigation on Flow Boiling Instability of R1233zd(E) in a Parallel Mini-Channel Heat Sink for the Application of Battery Thermal Management

Investigations on the throttling process of 3 He in a dilution refrigerator used for cooling superconducting quantum chips

Investigating the Thermal-Hydraulic Performance of New Refrigerant Mixtures Through Numerical Simulation of Minichannel and Microchannel Evaporators

Dilution Refrigeration Technology

Dry Dilution Refrigerator for Experiments on Quantum Effects in the Microwave Regime

Experimental study on a dry dilution refrigerator driven by a high-power linear compressor

Numerical investigation of a condensation-driven dilution refrigerator

Dry dilution refrigerator with 4He-1K-loop

Refrigeration performance enhancement of pulse tube refrigerators with He–H2 mixtures and Er3NiHx regenerative material

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

A Numerical Investigation of A Diffusion Absorption Refrigerator Operating with the Binary Refrigerant for Low Temperature Applications