Abstract:The present research attempts to comprehensively compare the evaporation characteristics of a novel R290/R13I1 (35/65 % by mass) with R1234yf in an offset-strip fin embedded plate heat exchanger. The impact of various testing phenomena, namely saturation temperature (T s ) (278 to 288 K), heat flux (q) (4000 to 10,000 W m −2 ), entry vapor quality (x i ) (0.1 to 0.8), and mass flux (G) (40 to 80 kg m −2 s −1 ) have been explored. Meanwhile, highly potential machine learning algorithms (MLAs) namely Linear Regression (LR), Multi-Layer Perceptron (MLP), and Extreme Gradient Boost regression (XGB) have been employed to predict the evaporation heat transfer coefficient (EHTC) and evaporation frictional pressure drop (EFPD) of the refrigerants. Findings revealed that the EHTC of R290/R13I1 is significantly lower than that of R1234yf by 7.9–38.8 % in the nucleation boiling or low mean vapor quality (x m ) domain, whereas it had superior EHTC by up to 18.2 % in the convective boiling domain (high x m ). Interestingly, there was a dry-out incidence at mid-x m ranges (0.35–0.5) for both refrigerants, except for R290/R13I1 at a higher G of 80 kg m −2 s −1 . In all cases (except at 10000 W m −2 ), the EFPD of R290/R13I1 increased by 0.3–11.1 % compared to that of R1234yf. The evaporation thermo-hydraulic performance (ETHP) factor analysis revealed that utilizing R290/R13I1 could perform satisfactorily in the convective boiling domain (x m > 0.5) with an ETHP factor ranging between 0.8 and 1.08, especially at high q, high T s , and low G conditions. New empirical correlations have been developed based on the experimental dataset for the EHTC and EFPD of the considered refrigerants with an mean absolute error (MAE) of up to 14.7 % and 13.4 %, respectively. Among the three MLAs with different enhancement methods, the EHTC and EFPD predictions using MLP, in combination with principal component analysis and hyperparameter tuning, had superior performance, with MAEs of 0.1119 and 0.0581, respectively, for R1234yf, while they were 0.1726 and 0.0482 for R290/R13I1.

Investigating the Thermal-Hydraulic Performance of New Refrigerant Mixtures Through Numerical Simulation of Minichannel and Microchannel Evaporators

A Comprehensive Study of Drop-in Alternative Mixtures for R134a in a Mobile Air-Conditioning System

Experimental study of ternary mixture R32/R125/R161 as alternative refrigerant to R407C

Study on the Performance of a Novel Waste Heat Recovery System at Low Temperatures

Study on Flow Boiling Heat Transfer Characteristics of R161/oil Mixture Inside Horizontal Micro-Fin Tube

Experimental Investigation on Flow Boiling Instability of R1233zd(E) in a Parallel Mini-Channel Heat Sink for the Application of Battery Thermal Management

Investigation on the Vapor–Liquid Equilibrium for the Ternary Mixture HFC-32 + HFC-125 + HFC-161 at Temperatures from 265.15 K to 303.15 K

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Visualization of R1233zd(E) Flow Boiling in Parallel Mini-channels

Theoretical and experimental study on a novel mixture refrigerant of R161 +R227ea

Cycle Performance Studies on a New HFC-161/125/143a Mixture As an Alternative Refrigerant to R404A

3-D numerical simulation of forced convection heat transfer in microscale rectangular channels for low GWP refrigerants

Evaporation Heat Transfer and Pressure Drop of R161 in A 7 Mm Micro-Fin Tube

Transitioning to low GWP refrigerants in automobiles: A numerical simulation study on R1234yf/R152a's heat transfer characteristics in porous microchannels

An experimental comparative analysis and machine learning prediction on the evaporation characteristics of R1234yf and R290/R13I1 in a plate heat exchanger

Phase Change and Heat Transfer Analysis of Different Refrigerants During Condensation in Minichannel Using a Novel Numerical Approach

Numerical Investigation of Condensation Heat Transfer Characteristics of R134A in Rectangular Minichannel

Numerical simulation of heat transfer characteristics of falling-film evaporation of R32/R134a non-azeotropic refrigerant outside a horizontal tube

Numerical Study of Condensation Heat Transfer Characteristics of R134a/R290 and R134a/R1270 Refrigerant Blends As Alternatives to Replace R404A

Condensation Heat Transfer and Flow Properties of R134a Refrigerant in Rectangular Minichannel: A Numerical Study