Abstract:Cement industry is estimated to account for ~6–7% of anthropogenic CO 2 emissions globally. Therefore, the identification of innovative solutions for their mitigation is both a priority and a challenge. The integration of carbon capture and storage technologies into the industrial production process is considered among the most viable solutions for this purpose, and calcium looping (CaL) represents one of the most promising. A key research challenge points to maximize process efficiencies and minimize production cost to decouple cement production from carbon emissions. The carbon capture process proposed in this work is a looping system where CO 2 is absorbed by calcium oxide (CaO) in the first reactor (carbonator) and the calcium carbonate (CaCO 3 ) produced is regenerated in an oxy-fired calciner. During calcination, CO 2 is released from the sorbents, purified, compressed, and then made available for geological storage. In this study, greenhouse gas (GHG) emissions related to two cement production systems with CaL carbon capture are evaluated: the tail-end CaL carbon capture and the integrated CaL carbon capture. The carbon footprint is complemented with the assessment of the resources depletion mineral and elements and the demand of primary energy. An eco-design approach was pursued by carrying out a life cycle assessment to identify the environmental hotspots and which CaL integration approach presents a higher potential for cement industry decarbonization. The results of the analysis were compared with a conventional cement production process. The results show that the GHG emissions may be reduced by 74% with a tail-end approach and 71% when the CaL is fully integrated into the cement production process. When a future perspective, with higher penetration of renewable energy resources into the electricity sector, was modeled, the results showed that CaL integrated into the clinker production process is more promising in terms of reduction of the carbon footprint, rather than the tail-end solutions. Primary energy consumption from non-renewables is substantially impacted by CaL, with the integrated CaL configuration showing to be a more efficient solution because of less primary energy consumption (coal).

Sustainability assessment for the cement flue gas methanation process using dual functional material (DFM)

Direct and continuous conversion of flue gas CO2 into green fuels using dual function materials in a circulating fluidized bed system

Flue-to-fuel: Bio-integrated carbon capture and utilization of dilute carbon dioxide gas streams to renewable methane

Modelling of an Integrated Process for Atmospheric Carbon Dioxide Capture and Methanation

Micro/nanofluid-based Carbon-Negative Process for Capturing CO2 from Low-Carbon Flue Gas to Produce Soda Ash: Effects and Enhancement Mechanisms

Material design and prospect of dual-functional materials for integrated carbon dioxide capture and conversion

Environmental impact assessment of post-combustion CO2 capture technologies applied to cement production plants

Integrated Carbon Capture and Utilization in the Cement Industry: A Comparative Study

High-temperature thermal storage-based cement manufacturing for decarbonization

Process Design and Techno-ECONOMIC Evaluation of a Decarbonized Cement Production Process Using Carbon Capture and Utilization

Integrated Capture and Conversion of CO2 to Methane using a Water-lean, Post-Combustion CO2 Capture Solvent.

Utilizing carbon dioxide from refinery for methanol and electricity co-production: System design and economic assessment

Mechanistic Study of Integrated CO2 Capture and Utilization over Cu and Al-modified Calcined Limestone with High Stability Using MFB-TGA-MS

The integrated approach of carbon capture, utilization, and storage via CO 2 mineralization for the removal of fly ash, bottom ash, and exhaust gas―A case study of circulating fluidized bed combustion

Design and Development of Integrated Direct Air Capture and Methanation Processes

Evaluating the Carbon Footprint of Cement Plants Integrated With the Calcium Looping CO2 Capture Process

Evaluation of a novel fertilizer-drawn forward osmosis and membrane contactor hybrid system for CO 2 capture using ammonia-rich wastewater

Integrated CO2 capture and selective conversion to syngas using transition-metal-free Na/Al2O3 dual-function material

Integrated CO 2 capture and conversion into methanol units: Assessing techno-economic and environmental aspects compared to CO 2 into SNG alternative

Process compatible desulfurization of NSP cement production: A novel strategy for efficient capture of trace SO 2 and the industrial trial

Integrated CO2 capture and In-Situ methanation by efficient dual functional Li4SiO4@Ni/CeO2