Abstract:SO2 emissions from coal-fired boilers are air pollutants and a source of acid rain, causing extensive environmental pollution. Limestone (CaCO3) is a Ca-based sorbent which is injected into circulating fluidized bed (CFB) boilers, where it combines with SO2 to produce calcium sulfate (CaSO4). As a result, SO2 emissions from a power plant are reduced. In this study, CaCO3 addition was proposed and the desulfurization efficiency improved. The direct desulfurization reaction is dominant in a commercial CFB boiler due to the high CO2 partial pressure, but CaO is formed at a fast reaction rate by calcination in the high temperature or in the low CO2 partial pressure region. When CaO remains in the loop seal, it is exposed to a high CO2 partial pressure condition moving through the recirculation section for an extended period and re-injected into the furnace as recarbonated CaCO3. To analyze the direct desulfurization reaction kinetics, a shrink core model in which the reaction proceeds inside the particle was adopted. Surface observations through FE-SEM of CaSO4 produced by the 180 minute long desulfurization experiment using TGA suggest that the CaSO4 crystal growth rate increased after the pre-treatment (recarbonation) of limestone. Recarbonation lowered the limestone crystallinity, causing a faster reaction. The CaCO3 recarbonation increased the Ca utilization by more than 20% when the direct desulfurization reaction occurred. The TGA experiments show that recarbonation contributes to CaSO4 conversion. Increasing the desulfurization efficiency using recarbonation can reduce the fixed investment and operating costs of oxy-fuel CFB plants because only desulfurization in the furnace is able to meet SO2 emission regulations or lower the flue gas desulfurization (FGD) dependence. Accordingly, the desulfurization conversions of recarbonated CaCO3 and limestone were compared in this study. Morphological changes in the limestone were also evaluated using XRD, FE-SEM, and other analysis methods.

Process compatible desulfurization of NSP cement production: A novel strategy for efficient capture of trace SO 2 and the industrial trial

Enhancing Simultaneous Desulfurization and Denitrification Efficiency of Cement Kiln Exhaust Gas Via Co-Catalytic Fenton Oxidation Process

Copper Slag Assisted Coke Reduction of Phosphogypsum for Sulphur Dioxide Preparation

Experimental Study on SO2 Recovery Using a Sodium–zinc Sorbent Based Flue Gas Desulfurization Technology

Calculation for Mineral Phases in the Calcination of Desulfurization Residue to Produce Sulfoaluminate Cement

An Efficient Method for Carbon Dioxide Sequestration Using Semidry Flue Gas Desulfurization Ash

Fixing sulfur dioxide by feeding calcine oxide into the rotary volatilization kiln in zinc smelting plant

Applications of ultrafine limestone sorbents for the desulfurization process in CFB boilers.

INTERACTION BETWEEN SO2 FROM FLUE GAS AND SORBENT PARTICLES IN DRY FGD PROCESSES

Novel Dry-Desulfurization Process Using Ca(OH)2/Fly Ash Sorbent in a Circulating Fluidized Bed

Enhancement of citric acid on low-grade limestone wet desulfurization performance coupled with spray and partial bubble technology

Experimental Study on in Situ Preparation of Supported Sorbent for Moderate Temperature CFB-FGD

Effect of Additive Agents on the Simultaneous Absorption of No2 and So2 in the Calcium Sulfite Slurry

A comparative evaluation of recarbonated CaCO3 derived from limestone under oxy-fuel circulating fluidized bed conditions

High efficiency desulfurization behavior by the sustainable low carbon utilization of carbide slag

Selective sulfur removal from semi-dry flue gas desulfurization coal fly ash for concrete and carbon dioxide capture applications

Improved removal of selenium by calcite-derived CaO with porosity and anti-sintering in presence of acid gas

Integrated Utilization Of Sewage Sludge And Coal Gangue For Cement Clinker Products: Promoting Tricalcium Silicate Formation And Trace Elements Immobilization

Development of New Desulfurization Agent Suitable for Dry Desulfurization Process at Low Temperature in China

Simulation and Experimental Study on the Desulfurization for Smelter Off-Gas Using a Recycling Ca-based Desulfurizer

Resource utilization of semi-dry flue gas desulfurization ash by thermal treatment on sintering machine