Abstract:In this study, a crack-free pyrolysis process of partially cured precursor powder compacts was developed to prepare dense silicon boron carbonitride (SiBCN) monoliths at much lower temperatures (1300 degrees C), thereby circumventing the challenges of sintering densification (> 1800 degrees C). Unlike the elastic fracture in over-cured precursors or the viscoelastic deformation in under-cured precursors, the partially cured precursor, exhibiting elastic-plastic deformation behavior, facilitates limited nanoscale pore formation in a dense structure, achieving a balance between crack-free pyrolysis and densification. Compared to SiBCN derived from the over-cured precursor (sigma = similar to 159 MPa, K-IC = 1.9 MPa center dot m(1/2), Vickers hardness (HV) = 7.8 GPa, and E = 122 GPa), the resulting SiBCN monolith exhibited significantly improved mechanical properties (sigma = similar to 304 MPa, K-IC = 3.7 MPa center dot m(1/2), HV = 10.6 GPa, and E = 161 GPa) and oxidation resistance. In addition, this study investigated the high-temperature performance of SiBCN monoliths, including crystallization and oxidation, and determined the oxidation kinetics induced by pore structure healing and the different oxidation mechanisms of Si-C-N and B-C-N clusters in the amorphous structure. Due to its unique composition and structure, the SiBCN ceramic oxide layer exhibits exceptional self-healing effects on repairing the nanoporous system in the initial stage and shows outstanding high-temperature stability during prolonged oxidation, mitigating adverse effects from bubble formation and crystallization. Due to the nanoporous structure, the oxidation rate is initially controlled by gas diffusion following a linear law before transitioning to oxide layer diffusion characterized by a parabolic law. Finally, due to different valence bond configurations, Si-C-N transforms into an amorphous SiCNO structure after phase separation, unlike the nucleation and growth of residual B-N-C.

Fate of Polymer Derived SiC Monolith at Different High Temperatures

Dense, Pure SiC Monoliths with Excellent Oxidation Resistance Sintered at Low Temperatures and High Pressures

Crystallization Behavior of Amorphous Si2bc3n Ceramic Monolith Subjected to High Pressure

Flexible ultrafine nearly stoichiometric polycrystalline SiC fibers with excellent oxidation resistance and superior thermal stability up to 1900 °C

High Temperature Structure Evolution of Macroporous SiOC Ceramics Prepared by a Sol–gel Method

Fabrication of Dense SiBCN Monolith at a Lower Temperature Andits High-Temperature Performance

Preparation of Hierarchical Porous Silicon Carbide Monoliths via Ambient Pressure Drying Sol–Gel Process Followed by High-Temperature Pyrolysis

A comprehensive investigation on the physical properties of SiC polymorphs for high-temperature applications: A DFT study based on GGA and hybrid HSE06 exchange correlation functionals

Polymer-derived SiC/B4C/C nanocomposites: Structural evolution and crystallization behavior

High-temperature Microstructure Evolution and Thermal Stability of SiCf/Ti60 Composites

Effects of pyrolysis temperatures on the oxidation behavior of PIP-processed SiCf/SiC composites

Silicon Carbide/Polysilazane Composite: Effect of Temperature on the Densification, Phase, and Microstructure Evolution

Mechanical Properties of Si3N4/BN Fibrous Monolithic Ceramics at Elevated-Temperature

Oxidation resistance of SiCf/SiC composites with a PyC/SiC multilayer interface at 500 °C to 1100°C

Structure and Energetics of SiOC and SiOC‐modified Carbon‐bonded Carbon Fiber Composites

High-pressure Synthesis, Mechanical Properties and Oxidation Behavior of Advanced Boron-Containing Α/β-Si 3N 4/si Ceramics Using Polymer-Derived Amorphous SiBN Ceramics

Cf/SiC Ceramic Matrix Composites with Extraordinary Thermomechanical Properties up to 2000 °C

Effect of Impurities Control on the Crystallization and Densification of Polymer-Derived SiC Fibers

Thermo‐Oxidative Stability of Polymer‐Derived Si‐B‐C Ceramics

Advanced hierarchical biomorphous silicon carbide monoliths

High-temperature tensile behavior of 3D SiC/SiC composites