Abstract:Si addition is commonly used to modify the iron-rich intermetallics in Al-Cu-Mn-Fe alloys, which is beneficial to increasing the use of recycled aluminum. Most of the available research has focused on the effect of Si content on the room-temperature mechanical properties of Al-Cu-Mn-Fe alloys. To expand the application of Al-Cu-Mn-Fe-Si alloys as light heat-resistant structural components in the automotive and aerospace industries, it is of great importance to investigate the evolution of iron-rich intermetallics and its effect on the fracture behavior of Al-Cu-Mn-Fe-Si alloys after thermal exposure and high-temperature tensile testing. In this work, the evolution of iron-rich intermetallics and the high-temperature mechanical properties of heat-treated Al-6.5Cu-0.6Mn-0.5Fe alloys with different Si contents after thermal exposure and high-temperature tensile testing were assessed by tensile tests, image analysis, scanning electron microscopy, X-Ray diffraction, transmission electron microscopy, and atomic probe tomography. The results indicate that the Al-6.5Cu-0.6Mn-0.5Fe-0.1Si alloy has excellent and stable high-temperature mechanical properties after long thermal exposure, which are better than those of most heat-resistant Al alloys. The high performance of the high-temperature mechanical properties is attributed to the high heat resistance of secondary intermetallics and precipitated particles. The addition of Si is detrimental to the strength of Al-6.5Cu-0.6Mn-0.5Fe alloys after long thermal exposure. This can be attributed to the solid-state phase transformation of iron-rich intermetallics from α-Fe to β-Fe, which results in the increase of needle-like Fe-rich phases and Si particles, the agglomeration of secondary intermetallics, and the consumption of Al2Cu phases. This result implies that Si is not suitable for modifying the iron-rich intermetallics in Al-Cu-Mn-Fe alloys used as light heat-resistant structural components.

Impact of Intermetallic Phases on the Localised Pitting Corrosion and High-Temperature Tensile Strength of Al–Si Mg Cu Ni Alloys

Influence of Ni Addition on Corrosion Performance of Medium-temperature Filler Metal with Low Cu Content for Al Brazed Joints

Effects of Cu Addition on the Microstructure and Properties of the Al–Mn–Fe–Si Alloy

The strengthening role of micro-sized phases and nano-precipitates in Al–Mg 2 Si–Cu(–Ni) alloys at 25 °C and 350 °C

Effect of nickel on the microstructure and mechanical property of die-cast Al–Mg–Si–Mn alloy

Evolution of Iron-Rich Intermetallics and its Effect on the Mechanical Properties of Al-Cu-Mn-Fe-Si Alloys after Thermal Exposure and High-Temperature Tensile Testing

Effects of Low Nickel Content on Microstructure and High-Temperature Mechanical Properties of Al-7Si-1.5Cu-0.4Mg Aluminum Alloy

Effect of Fe and Mn Content on the Microstructures and Tensile Behaviour of AlSi7Cu3 Alloy: Thermal Analysis and Tensile Tests

P phase precipitation and strengthening behavior of a novel polycrystalline Ni 3 Al-based intermetallic alloy at 1100 °C

Towards high mechanical performance Al–Cu–Mg–Fe–Ni alloy: influence of composition, solution treatment and aged process on microstructural evolution and mechanical properties

Role of intermetallic phases in initiation and propagation of intergranular corrosion of an Al-Li-Cu-Mg alloy

Revealing the Effect of Phase Composition and Transformation on the Mechanical Properties of a Cu–6Ni–6Sn–0.6Si Alloy

Effects of Ti Addition on Microstructure, Mechanical Properties and Corrosion Resistance of the Cu-Zn-Ni Alloy

Characteristics of Fe-rich Intermetallics Compounds and Their Influence on the Cracking Behavior of a Newly Developed High-Pressure Die Cast Al–4Mg–2Fe Alloy

Strong elemental interaction enhances the thermal stability of coherent precipitation strengthened Cu–Ni–Al alloys

Effect of intermetallics on properties of Al-6.1Zn-2.3Mg-1.7Cu-0.15Zr-0.3Nd alloy: First-principles calculation

Improving the ductility of high-strength multiphase NiAl alloys by introducing multiscale high-entropy phases and martensitic transformation

Effects of Alloying Elements and Temperature on Thermodynamic State and Microstructure of Piston Aluminum Alloy

Analysis of Ni-Cu Interaction in Aluminum-Based Alloys: Hardness, Tensile and Precipitation Behavior

Enhanced mechanical and damping properties of Cu-Modified Al-Ni eutectic alloys: Solid-solution and precipitation hardening effects

Effect of Al Element on the Microstructure and Properties of Cu-Ni-Fe-Mn Alloys