Abstract:In this study, a continuum damage mechanics (CDM) finite element (FE) model was developed to investigate the effects of surface roughness on rolling contact fatigue (RCF) life of non-conformal contacts. In order to assess the surface roughness of tribo-components, twelve deep groove rolling element bearings from various companies in different sizes were procured and measured using an optical surface profilometer. The roughness average (Ra) and the root mean square of surface roughness (RMS, σ) ranged from a low of 0.03, 0.05 µm to a high of 0.14, 0.20 µm, respectively. The number of peaks and valleys per 400 µm were measured and calculated. The number of peaks ranged from 11 to 31 (>99.5% Confidence Interval). The measured surfaces also revealed that a sinusoidal pattern can be used to accurately represent the surface patterns. The sinusoidal surface pattern was used to determine the elastohydrodynamic lubrication (EHL) pressure distribution between an equivalent rough surface in contact with a smooth surface. Four roughness amplitude were used to generate specific film thicknesses (λ-ratios) resulting in full to mixed EHL lubrication regimes. The EHL pressure distributions were replaced with representative symmetric Hertzian pressure distributions in order to remove the effect of asymmetry of an EHL pressure distribution. The resulting symmetric pressure distributions were used in a finite element continuum damage mechanics model to determine RCF life of machine elements operating in specific film thickness range of 1 < λ < 10. The RCF results from the FE model indicate that as roughness amplitude increases or lambda ratio decreases, the fatigue lives decrease for the various frequencies. Additionally, subsurface failure fatigue lives are reduced as roughness frequency increases regardless of amplitude or Hertzian pressure. The RCF results also indicate that for the low frequency pressure distribution the contact is most susceptible to surface failure, whereas for high frequency pressure distribution the contact resists surface failure. The results from this investigation were used to develop surface roughness effects for various RCF life equations commonly used in rolling element bearing application.

Rolling contact fatigue failure mechanism of bearing steel on different surface roughness levels under heavy load

A study on the of rolling contact fatigue mechanism of ZC-L cast wheel steel

Experimental Study of the Effects of Surface Defects on Rolling Contact Fatigue Behavior

BEHAVIOR OF SHORT FATIGUE CRACKS IN MEDIUM CARBON BAINITIC BACK-UP ROLL STEEL UNDER MILD TRACTIVE ROLLING CONTACT

Ratcheting led surface failure of medium carbon bainitic steel under mild operation conditions

The effect of friction on surface crack initiation in rolling contact fatigue considering damage accumulation

Subsurface propagation of partial ring cracks under rolling contact: Part I. Experimental studies

Research on the damage mechanism of the rolling contact fatigue of a wheel–rail contact system under the influences of surface defects

A continuum damage mechanics finite element model for investigating effects of surface roughness on rolling contact fatigue

The origin of microstructural alterations in M50 bearing steel undergoing rolling contact fatigue

Failure Analysis on Vertical Cracking of Medium Carbon Bainitic Steel Backup Roll

A peridynamic study on the effects of surface topography on rolling contact fatigue

Rolling Contact Fatigue Behavior of Thermal-Sprayed Coating: A Review

Modelling micropit formation in rolling contact fatigue of bearings with a crystal plasticity damage theory coupled with cohesive finite elements

Rail rolling contact fatigue formation and evolution with surface defects

An electron backscatter diffraction investigation on microstructural evolution of pearlite wheel steel near rolling contact fatigue crack tip

Experimental study on wheel-rail rolling contact fatigue damage starting from surface defects under various operational conditions

The Evolution of White Etching Cracks (WECs) in Rolling Contact Fatigue-Tested 100Cr6 Steel

A peridynamic damage-cumulative model for rolling contact fatigue

Effects of Surface Defects on Rolling Contact Fatigue in 10Cr4ni4mo4v

On the Formation and Damage Mechanism of Rolling Contact Fatigue Surface Cracks of Wheel/rail under the Dry Condition