Abstract:：By fitting the measured topography data of a single asperity on the plane grinding surface, a method of using the semi-periodic cosine curve rotating body equivalent asperity is proposed.The method of calculating the dimension parameters of a single asperity topography is obtained by marking the peak and valley of the measured surface topography.Combining with the Gauss distribution, the simulated surface which can more accurately characterize the actual surface morphology is established.Based on the simulated surface, the critical interference of the asperities in the elastic-plastic deformation region is re-calculated by using contact mechanics theory and statistical theory.The analytical relationship between contact parameters and contact pressure at different deformation stages are obtained.Then, a micro-contact model of rough surface in plane grinding is established.Finally, the statistical parameters of the measured grinding surface are taken as the initial values for the data simulation.The prediction results of average distance and real contact area are compared among present model, CEB model and KE model.The results show that under the same contact pressure, the average distance and the real contact area predicted by the present model are larger than those obtained by CEB model and KE model, and the difference between the three models increases with the increase of contact pressure.According to the fitting results of measured topography data by different asperity topography assumptions, the prediction results of contact parameters of surface grinding in present model are more accurate and reasonable.

A Study of the Effect of Roughness on the Three-Body Wear Mechanism from a Microscopic Point of View: Asperity Peak Removal

Advances in Studies on Asperity Peak Contacts

Fatigue Damage of an Asperity in Frictionless Normal Contact with a Rigid Flat

Asperity level characterization of abrasive wear using atomic force microscopy

Discrimination of Wear Performance Based on Surface Roughness Parameters arithmetic mean height ( Sa ) and Skewness ( Ssk )

Micromechanics of material detachment during adhesive wear: A numerical assessment of Archard's wear model

The effects of initial and in-situ generated roughness on polymer wear: Voluntary vs. involuntary

Atomistic understanding of rough surface on the interfacial friction behavior during the chemical mechanical polishing process of diamond

A Micro-contact Model for Rough Surface of Plane Grinding

Influence of Small Particle Surface Asperities on Macro and Micro Mechanical Behavior of Granular Material

Research on the wear characteristics of magnetorheological fluid in sealing interface considering the interaction between surface roughness and magnetic particles

Characterization of the Nonuniform Friction Behaviors in Rough Surfaces for the Initial Slip by the Micro-Contact and Deformation Zones

Modeling Adhesive Wear in Asperity and Rough Surface Contacts: A Review

A Concept of the Effective Surface Profile to Predict the Roughness Parameters of Worn Surface

Micro-scale contact behavior and its effect on the material removal process during chemical mechanical polishing

Modeling of the Particle Abrasion Process and a Discrete Element Method Study of Its Shape Effect

Effect Of Surface Energy On Shearing Of Metal Asperities Contact At The Nanoscale

Analysis, Modeling and Experimental Study of the Normal Contact Stiffness of Rough Surfaces in Grinding

A study of the mechanisms of abrasive wear for ductile metals under wet and dry three-body conditions

Tribological mechanism of micro/meso/macroscopic textured surfaces under different normal forces, relative velocities, and sliding directions

Novel three-body nano-abrasive wear mechanism