Abstract:Due to the pristine interface of the 2D/3D face-tunneling heterostructure with an ultra-sharp doping profile, the 2D/3D tunneling field-effect transistor (TFET) is considered as one of the most promising low-power devices that can simultane-ously obtain low off-state current (IOFF), high on-state current (ION) and steep subthreshold swing (SS). As a key element for the 2D/3D TFET, the intensive exploration of the tunnel diode based on the 2D/3D heterostructure is in urgent need. The transfer technique composed of the exfoliation and the release process is currently the most common approach to fabri-cating the 2D/3D heterostructures. However, the well-established transfer technique of the 2D materials is still unavailable. Only a small part of the irregular films can usually be obtained by mechanical exfoliation, while the choice of the chemical exfoliation may lead to the contamination of the 2D material films by the ions in the chemical etchants. Moreover, the defor-mation of the 2D material in the transfer process due to its soft nature also leads to the nonuniformity of the transferred film, which is one of the main reasons for the presence of the wrinkles and the stacks in the transferred film. Thus, the large-scale fabrication of the high-quality 2D/3D tunnel diodes is limited. In this article, a comprehensive transfer technique that can mend up the shortages mentioned above with the aid of the water and the thermal release tape (TRT) is proposed. Based on the method we proposed, the MoS2/Si tunnel diode is experimentally demonstrated and the transferred monolayer MoS2 film with the relatively high crystal quality is confirmed by atomic force microscopy (AFM), scanning electron microscopy (SEM), and Raman characterizations. Besides, the prominent negative differential resistance (NDR) effect is observed at room temperature, which verifies the relatively high quality of the MoS2/Si heterojunction. The bilayer MoS2/Si tunnel diode is also experimentally fabricated by repeating the transfer process we proposed, followed by the specific analysis of the electrical characteristics. This study shows the advantages of the transfer technique we proposed and indicates the great application foreground of the fabricated 2D/3D heterostructure for ultralow-power tunneling devices.

Hidden Vacancy Benefit in Monolayer 2D Semiconductors

High mobility top gated field-effect transistors and integrated circuits based on chemical vapor deposition-derived monolayer MoS 2

Approaching Ohmic Contacts for Ideal Monolayer MoS2 Transistors Through Sulfur-Vacancy Engineering

Deciphering Vacancy Defect Evolution of 2D MoS 2 for Reliable Transistors

Temperature-Triggered Sulfur Vacancy Evolution in Monolayer MoS2 /Graphene Heterostructures.

Toward High-mobility and Low-power 2D MoS2 Field-effect Transistors

MoS2/Si Tunnel Diodes Based on Comprehensive Transfer Technique

Towards Intrinsic Charge Transport in Monolayer Molybdenum Disulfide by Defect and Interface Engineering

Probing the Relationship between Defects and Enhanced Mobility in MoS2 Monolayers Grown by Mo Foil

Enhancement of Carrier Mobility in Semiconductor Nanostructures by Carrier Distribution Engineering

Chemical environment dependent Stabilities, electronic properties and diffusions behaviors of intrinsic point defects in novel Two-Dimensional MoSi2N4 monolayer

Vacancy effect on the structure and diffusion of a Li adatom on the 2D Janus MoSSe monolayer

Two-Dimensional Semiconductors with High Intrinsic Carrier Mobility at Room Temperature

Performance and stability improvement of CVD monolayer MoS2 transistors through HfO2 dielectrics engineering

Theoretical and experimental investigation of vacancy-based doping of monolayer MoS$_2$ on oxide

Defect-Engineered Atomically Thin MoS<sub>2</sub> Homogeneous Electronics for Logic Inverters

Quantum Transport Simulation of Sub-1-nm Gate Length Monolayer MoS2 Transistors

Sub-10 Nm Monolayer MoS2 Transistors Using Single-Walled Carbon Nanotubes As an Evaporating Mask

Enhancing Carrier Mobility in Monolayer MoS 2 Transistors with Process-Induced Strain

Role of Vacancies in Tuning the Electronic Properties of Au-MoS2 Contact

Enhancing the Contact Performance of Two-Dimensional Metals/In 2 S 3 Junctions by the Self-Repair of Sulfur Vacancies in Air