Abstract:Remarkably improved dielectric properties including high-k, low loss, and high breakdown strength combined with promising mechanical performance such as high flexibility, good heat, and chemical resistivity are hard to be achieved in high-k dielectric composites based on the current composite fabrication strategy. In this work, a family of high-k polymer nanocomposites has been fabricated from a facile suspension cast process followed by chemical cross-linking at elevated temperature. Internal double bonds bearing poly(vinylidene fluoride-chlorotrifluoroethylene) (P(VDF-CTFE-DB)) in total amorphous phase are employed as cross-linkable polymer matrix. α-SiC particles with a diameter of 500 nm are surface modified with 3-aminpropyltriethoxysilane (KH-550) as fillers for their comparable dielectric performance with PVDF polymer matrix, low conductivity, and high breakdown strength. The interface between SiC particles and PVDF matrix has been finely tailored, which leads to the significantly elevated dielectric constant from 10 to over 120 in SiC particles due to the strong induced polarization. As a result, a remarkably improved dielectric constant (ca. 70) has been observed in c-PVDF/m-SiC composites bearing 36 vol % SiC, which could be perfectly predicted by the effective medium approximation (EMA) model. The optimized interface and enhanced compatibility between two components are also responsible for the depressed conductivity and dielectric loss in the resultant composites. Chemical cross-linking constructed in the composites results in promising mechanical flexibility, good heat and chemical stability, and elevated tensile performance of the composites. Therefore, excellent dielectric and mechanical properties are finely balanced in the PVDF/α-SiC composites. This work might provide a facile and effective strategy to fabricate high-k dielectric composites with promising comprehensive performance.

A Fluorinated Thermocrosslinkable Organosiloxane: A New Low-k Material at High Frequency with Low Water Uptake.

Intrinsic low dielectric thermally crosslinked fluorinated polystyrene siloxanes at high frequency with good thermostability and optical properties

An ultralow-k dielectric derived from a fluorinated polybenzoxazole composite film with yolk–multishell mesoporous silica nanostructures

Benzocyclobutene-functionalized Hyperbranched Polysiloxane for Low-K Materials with Good Thermostability

Partially Bio-Based and Fluorinated Polysiloxane with High Transparency and Low Dielectric Constant

Double-decker Silsesquioxane-Doped Benzocyclobutene Functionalized Siloxane Polymer for Low K Materials

Low dielectric silsesquioxane-modified benzocyclobutene composites

Resveratrol-Based Fluorinated Materials with High Thermostability and Good Dielectric Properties at High Frequency

High Dielectric and Mechanical Properties Achieved in Cross-Linked PVDF/α-SiC Nanocomposites with Elevated Compatibility and Induced Polarization at the Interface

Benzocyclobutene organosiloxane resins prepared by alcoholysis of BCB functionalized chlorosilane for highly crosslinked low-k thermosets

High‐performance cross‐linked SiCOH/polyimide composite film with an ultralow dielectric constant at high frequency

Multibenzocyclobutene Functionalized Silane for Low-k Polyarylsilane Thermosets with Low Coefficient of Thermal Expansion and High Thermostability

A Low Dielectric Constant Material Synergized by Calix[4]arene and Benzocyclobutene Units

Characterization of ultra-low k porous organosilica thin films

Frequency-Dependent Dielectric Permittivity and Water Permeability in Ordered Mesoporous Silica-Grafted Fluorinated Polyimides

High-Performance Intrinsic Low-K Polymer Via the Synergistic Effect of Its Three Units: Adamantyl, Perfluorocyclobutylidene and Benzocyclobutene

Multi-benzocyclobutene Functionalized Siloxane Monomers Prepared by Piers-Rubinsztajn Reaction for Low-K Materials

Low-T Sintering, Low-Dielectric Materials for High Frequency Multilayer Chip Inductors

Polyimide Films with Liquid‐Crystal‐Like Structures: Toward Ultralow Dielectric Loss at High Frequencies

Fluorinated polyimide with triphenyl pyridine structure for 5G communications: Low dielectric, highly hydrophobic, and highly transparent

Low reflective index, highly transparent, and ultra-low dielectric constant materials prepared via effective copolymerization of 4-methyl-1-pentene and a Si-containing α,ω-diolefin