Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. SS316 is the most commonly used material among the existing stainless steels. SS316-based composite materials provide tailor-made stuff to the various automotive and machinery components due to their competent properties. In the current work, SS316, EWAC, and Cr7C3 powders have been selected for the development of cast specimens in the domestic microwave applicator. The cast of the SS316+15EWAC+5Cr7C3, SS316+15EWAC+10Cr7C3, and SS316+15EWAC+15Cr7C3 compositions has been prepared using a novel technique of microwave hybrid heating. The sample size of 30 × 6 mm2 has been used for flexural strength analysis. The flexural modulus, flexural strength, maximum load, strain at break, and strain at peak load have been tested on a universal testing machine. The maximum values of flexural strength, flexural modulus, peak load, and microhardness were found 469.86 MPa, 10,2321.79 MPa, 4510.65 N, and 585.93 ± 203.33 HV respectively for SS316+15EWAC+15Cr7C3 cast, and maximum strain at peak load and the maximum strain at breaking load were 3.07 and 4.29% respectively for SS316+15EWAC+10Cr7C3 cast. The highest microhardness of 615 HV has been obtained at the carbide phase in the case of SS316+15EWAC+15Cr7C3 cast. The XRD presented the leading peaks of σ-Fe, μ-Fe3Ni2, τ-Cr23C6, α-MoNi4, γ-Mo2C, and β-Fe5C2. The microstructural morphology of the composite casting revealed the proper coalescence of the matrix, homogeneous dispersion of reinforcements, dendrites formation, and equiaxed grain growth. Overall the metallurgical and mechanical properties of the composite cast were improved.

Microstructural investigation of variable tungsten reinforcement in copper-based composite microwave castings

Long-term Ball Milling and Hot Pressing of In-Situ Nanoscale Tungsten Carbides Reinforced Copper Composite and Its Characterization

Enhancing microstructural properties of copper-based composite castings through microwave-assisted reinforcement with MWCNT

Freeze-casted tungsten skeleton reinforced copper matrix composites

Development of iron-based composite materials through electromagnetic radiations in a domestic microwave oven

Microstructure and Properties of W Cu Composites with Low Copper Content at Different Sintering Temperatures

Tungsten Matrix Composite Reinforced with CoCrFeMnNi High-Entropy Alloy: Impact of Processing Routes on Microstructure and Mechanical Properties

Microstructure and properties of W Cu composites reinforced by in-situ generated WC

Microstructural studies of W–10wt.% Cu composites prepared by using ultrafine composite powder

Electroless Copper Plating of Tungsten Powders and Preparation of WCu20 Composites by Microwave Sintering

Fabrication and microstructure of in situ vanadium carbide ceramic particulates-reinforced iron matrix composites

Microstructure and Mechanical Behavior of Microwave Sintered Cu50Ti50 Amorphous Alloy Reinforced Al Metal Matrix Composites

Microstructure and high-temperature mechanical properties of Cu-W composite prepared by hot isostatic pressing

Engineering performance of tungsten network reinforced copper matrix composites synthesized by selective laser melting and infiltration

Investigation on Microstructure and Fracture of WC Particles Reinforced Steel Matrix Composites by Electroslag Melting and Casting

High-temperature mechanical and electrical properties of W-particle-reinforced Cu-matrix composites from improved electroless plated powders

Study of Microstructure of Coarse-grain Tungsten Carbide Composite Produced by In-Situ Metallurgy Reaction

Flexural behavior of SS316-based metal matrix composite prepared through microwave heating

Preparation and mechanical property of W f/Cu alloy matrix composites

Microstructure, High-Temperature Wear, and Corrosion Behaviors of UNS R56320-xWC Composite Fabricated through Powder Metallurgy

Welding failure analysis of tungsten-copper composite material used for microwave circuits