Abstract:N‐type Mg3Sb2‐based material is recognized as a promising thermoelectric material. Ag is revealed as an effective dopant for the Mg3.2Sb1.5Bi0.49Te0.01 system with a different effect from Cu. A peak ZT of 1.64 at 673 K is achieved. Moreover, a 2‐pair module fabricated with MgAgSb as p‐type material, results in a high ηmax of ≈7.9% at relatively low ΔT of 277 K. The n‐type Mg3(Sb, Bi)2 compounds show great potential for wasted heat energy harvesting due to their promising thermoelectric properties. This work discovers that doping transition element Ag into the n‐type Mg3(Sb, Bi)2 can effectively optimize the power factor and suppress the lattice thermal conductivity simultaneously. Interestingly, the Ag doping has different effects compared to the isoelectronic and same group element Cu addition studied previously. A high power factor of 19.6 μW cm−1 K−2 is obtained at 673 K owing to the increased electrical conductivity. At the same time, the lattice thermal conductivity is reduced to ≈0.5 W m−1 K−1 because of enhanced phonon scattering induced by Ag atoms. These improvements lead to a peak figure of merit (ZT) of 1.64 at 673 K as well as a high average ZT of 1.27 is obtained from 323 K to 673 K. Furthermore, a thermoelectric single leg with a competitive conversion efficiency of ≈11% under a hot‐side temperature of 673 K is fabricated successfully. In addition, a 2‐pair module composed of n‐type Mg3(Sb, Bi)2 alloy and p‐type MgAgSb‐based compound demonstrates the high conversion efficiency of ≈7.9% at a temperature difference of 277 K, which will significantly upgrade the sustainable energy recycling technology.

Magnetic-field-enhanced high thermoelectric performance in narrow-band-gap polycrystalline semiconductor Ag 2+δ Te

Magnetic-field-enhanced High Thermoelectric Performance in Narrow-Band-gap Polycrystalline Semiconductor Ag2+δTe

Large Transverse Magneto-Thermoelectric Effect in Narrow-Band-gap Polycrystalline Ag2-δTe

Enhancing Thermoelectric Performance in P‐Type Sb 2 Te 3 ‐Based Compounds Through Nb─Ag Co‐Doping with Donor‐Like Effect

High-performance in n-type PbTe-based thermoelectric materials achieved by synergistically dynamic doping and energy filtering

Enhanced near-room-temperature thermoelectric performance in GeTe

Enhancing the Thermoelectric Performance of n‐Type Mg3Sb2‐Based Materials via Ag Doping

Enhanced Thermoelectric Performance in MnTe Due to Doping and In-Situ Nanocompositing Effects by Ag2S Addition

Functionally Separated Electronic Band Engineering Via Multi-Element Doping Plus High-Density Defects Advances Board-Temperature-range Thermoelectric Performance in GeTe

Enhancing Thermoelectric Performance in P-Type Sb2Te3-Based Compounds Through Nb─Ag Co-Doping with Donor-Like Effect.

Tailoring band structure and Ge precipitates through Er and Sb/Bi co-doping to realize high thermoelectric performance in GeTe

Enhancing Thermoelectric Performance of CuInTe2 via Trace Ag Doping at Indium Sites

Suppressing Ag2Te Nanoprecipitates for Enhancing Thermoelectric Efficiency of AgSbTe2

Enhancement on thermoelectric performance by Ti doping and vacancies

Electrical, magneto-transport and significant thermoelectric properties of Te-rich ZrTe5+δ polycrystals

Rare-Earth Nd Inducing Record-High Thermoelectric Performance of (GeTe)(85)(AgSbTe2)(15)

Improving Thermoelectric Performance of AgSbTe2 through Suppression of Ag2Te and Band Convergence via Mg and Ti Codoping

Enhanced Thermoelectric Performance of Mg-Doped AgSbTe 2 by Inhibiting the Formation of Ag 2 Te

Band convergence and nanostructure modulations lead to high thermoelectric performance in SnPb0.04Te-y% AgSbTe2

Promising thermoelectric performance in p-type AgBiSe 2 doping with alkaline-earth metals

Enhancing thermoelectric performance in GeTe through Ge enrichment regulation and AgCuTe alloying