Abstract:The proliferation of place-and-forget devices driven by the exponentially-growing Internet of Things industry has created a demand for low-voltage thin-film transistor (TFT) electronics based on solution-processible semiconductors. Amongst solution-processible technologies, TFTs based on semiconducting single-walled carbon nanotubes (sc-SWCNTs) are a promising candidate owing to their comparatively high current driving capability in their above-threshold region at low voltages, which is desirable for applications with constraints on supply voltage and switching speed. Low-voltage above-threshold operation in sc-SWCNTs is customarily achieved by using high-capacitance-density gate dielectrics such as metal-oxides fabricated via atomic layer deposition (ALD) and ion-gels. These are unattractive, as ALD requires complex-processing or exotic precursors, while ion-gels lead to slower devices with poor stability. This work demonstrates the fabrication of low-voltage above-threshold sc-SWCNTs TFTs based on a high-capacitance-density hybrid nanodielectric, which is composed of a readily-made AlO (x) nanolayer and a solution-processed self-assembled monolayer (SAM). The resultant TFTs can withstand a gate-channel voltage of 1-2 V, which ensures their above-threshold operation with balanced ambipolar behavior and electron/hole mobilities of 7 cm(2) V-1 s(-1). Key to achieving balanced ambipolarity is the mitigation of environmental factors via the encapsulation of the devices with an optimized spin-on polymer coating, which preserves the inherent properties of the sc-SWCNTs. Such balanced ambipolarity enables the direct implementation of CMOS-like circuit configurations without the use of additional dopants, semiconductors or source/drain electrode metals. The resultant CMOS-like inverters operate in the above-threshold region with supply voltages in the 1-2 V range, and have positive noise margins, gain values surpassing 80 V/V, and a bandwidth exceeding 100 kHz. This reinforces SAM-based nanodielectrics as an attractive route to easy-to-fabricate sc-SWCNT TFTs that can operate in the above-threshold region and that can meet the demand for low-voltage TFT electronics requiring moderate speeds and higher driving currents for wearables and sensing applications.

Capacitively Coupled Near-Threshold Biasing: Low-Power Design Based on Metal Oxide TFTs for IoT Applications

Low-Power Design for Unipolar ITO-Stabilized ZnO TFT RFID Code Generator Using Differential Logic Decoder

Fully-Solution-Processed Enhancement-Mode Complementary Metal-Oxide-Semiconductor Carbon Nanotube Thin Film Transistors Based on BiI3 -Doped Crosslinked Poly(4-Vinylphenol) Dielectrics for Ultralow-Power Flexible Electronics

Ambipolar Carbon Nanotube Transistors with Hybrid Nanodielectric for Low-Voltage CMOS-like Electronics

Polarity tuning of carbon nanotube transistors by chemical doping for printed flexible complementary metal-oxide semiconductor (CMOS)-like inverters

Matched printed carbon nanotube complementary metal-oxide-semiconductor (CMOS) devices for flexible circuits

Ultralow‐power and radiation‐tolerant complementary metal‐oxide‐semiconductor electronics utilizing enhancement‐mode carbon nanotube transistors on paper substrates

Ambipolarity Suppression of Carbon Nanotube Thin Film Transistors

Speed and Scalability of Ambipolar Deep-Subthreshold TFTs for Ultralow-Power Printed Electronics

Low-Voltage Oxide-Based Tfts Self-Assembled on Paper Substrates with Tunable Threshold Voltage

A 0.08%/V 32.3-Ppm/ $^{\circ}$ C 36.6-Khz Unregulated Current-Reuse Ring Oscillator with $v_{\mathrm{gs}}$ -Ratio-based Compensation Using One-Type-Only Resistor

Aging-Aware LTPO DTCO for Large-Scale Integrated Circuit-Driven Flexible Intelligent Sensing System

A novel negative quantum capacitance field-effect transistor with molybdenum disulfide integrated gate stack and steep subthreshold swing for ultra-low power applications

A 8.1-nW, 4.22-kHz, −40–85 °C relaxation oscillator with subthreshold leakage current compensation and forward body bias buffer for low power IoT applications

On‐chip power supply generation for self‐contained electronics using oxide thin‐film transistors

Lateral-coupling coplanar-gate oxide-based thin-film transistors on bare paper substrates

A Low-Power Ring Oscillator Using Pull-Up Control Scheme Integrated by Metal–Oxide TFTs

Van der Waals negative capacitance transistors

A Low Power Analog Baseband for IoT Applications in 40 Nm CMOS

Chip implementation of low-power high-efficient buck converter for battery-powered IOT applications

Rational tuning of the cation ratio in metal oxide semiconductor nanofibers for low-power neuromorphic transistors