Abstract:Copper iodide (CuI) has emerged as a promising p-type semiconductor material owing to its excellent carrier mobility, high transparency, and solution processability. Although CuI has potential for numerous applications, including perovskite solar cells, photovoltaic devices, and thin-film transistors (TFTs), the close relationship between the anion vacancy generation and the charge transport mechanism in CuI-based devices is underexplored. In this study, we propose solution-processed p-type CuI TFTs which were subject to the thermal annealing process in air and vacuum atmospheres at temperatures of 100, 200, and 300 °C. The chemical states and surface morphologies of the CuI thin films were systematically investigated, revealing the generation of iodine vacancy states and the reduction of carrier concentration, as well as increased film density and grain size according to the annealing condition. Further, the effective role of the Al2O3 passivation layer on the electrical characteristics of the solution-processed CuI TFTs is demonstrated for the first time, where the Al2O3 precursor greatly enhanced the electrical performance of the CuI TFTs, exhibiting a field-effect mobility of 4.02 cm2/V·s, a subthreshold swing of 0.61 V/decade, and an on/off current ratio of 1.12 × 104, which exceed the values of CuI TFTs reported so far. Based on the synergistic effects of the annealing process and the passivation layer that engineered the iodine vacancy state and morphology of CuI, the proposed CuI TFTs with the Al2O3 passivation layer showed excellent reliability under 100 times repeated operation and long-term stability over 216 h, where the transfer curves slightly shifted in the positive direction of 1.36 and 1.88 V measured at a current level of 10-6 A for the reliability and stability tests, respectively. Thus, this work opens a new window for solution-processed p-type CuI TFTs with excellent stability for developing next-generation complementary logic circuits.

Enhanced Performance of P-Channel CuIBr Thin-Film Transistor by ITO Surface Charge-Transfer Doping

Synthesis of Vacancy-Controlled Copper Iodide Semiconductor for High-Performance p-Type Thin-Film Transistors

High-mobility flexible/transparent p-type copper iodide thin-film transistors and complementary inverters

High-Performance p-Type Transparent Conducting CuI−Cu2O Thin Films with Enhanced Hole Mobility, Surface, and Stability

Molecule Charge Transfer Doping for p‐Channel Solution‐Processed Copper Oxide Transistors

Approaching Theoretical Limits in The Performance of Printed P‐Type Cui Transistors via Room Temperature Vacancy Engineering

Investigation of Bismuth Doped Indium-Zinc-Oxide Thin Film Transistors

Achieving High-Performance Solution-Processed Thin-Film Transistors by Doping Strong Reducibility Element Into Indium-Zinc-Oxide

Water-Processed Ultrathin Crystalline Indium–Boron–Oxide Channel for High-Performance Thin-Film Transistor Applications

Enhanced Electrical Performance and Stability of Solution-Processed Thin-Film Transistors with In2O3/In2O3:Gd Heterojunction Channel Layer

Amorphous copper iodide: a p-type semiconductor for solution processed p-channel thin-film transistors and inverters

The Effect of the Charge Transfer Transition of the Tetravalent Terbium on the Photostability of Oxide Thin‐Film Transistors

Performance improvement of tin-doped zinc oxide thin-film transistor by novel channel modulation layer of indium tin oxide/tin zinc oxide

Effect of Indium Doping on Bias Stability in Dual-Target Co-Sputtering InZnSnO Thin-Film Transistors

Effect of Titanium Cation Doping on the Performance of In2O3 Thin Film Transistors Grown via Atomic Layer Deposition

Engineering Copper Iodide (CuI) for Multifunctional p‐Type Transparent Semiconductors and Conductors

Homojunction Interface Boosts Hole-Carrier Injection in p-Type CuI Nanoribbon Field-Effect Transistors

Enhancement in Performance and Reliability of Transparent IGZO Thin-Film Transistors by ITO/Ti Stacked Source/Drain Contacts

Performance Enhancement of Indium Zinc Oxide Thin-Film Transistors Through Process Optimizations

Modulation of the Al/Cu2O Schottky Barrier Height for p-Type Oxide TFTs Using a Polyethylenimine Interlayer

A study on the high mobility and improved reliability of Pr-doped indium zinc oxide thin film transistors