Abstract:Effects of film thickness and electrolyte concentration on the photovoltaic performance of TiO2-based dye-sensitized solar cell (DSSC) were studied. Nanocrystalline anatase TiO2 thin films with varying thicknesses (3.2–18.9μm) have been deposited on FTO/glass substrates by screen printing method as work electrodes for DSSC. The prepared samples were characterized by UV-Vis spectroscopy, Atomic Force Microscopy/Scanning Tunneling Microscopy (AFM/STM) and X-ray diffraction (XRD). The optimal thickness of the TiO2 photoanode is 13.5μm. Short-circuit photocurrent density (Jsc) increases with film thickness due to enlargement of surface area whereas open-circuit voltage decreases with increase in thickness due to increase in electron diffusion length to the electrode. However, the Jsc and Voc of DSSC with a film thickness of 18.9μm (7.5mA/cm2 and 0.687V) are smaller than those of DSSC with a TiO2 film thickness of 13.5μm (9.9mA/cm2 and 0.734V). This is because the increased thickness of TiO2 thin film resulted in the decrease in the transmittance of TiO2 thin films hence reducing the incident light intensity on the N719 dye. Photovoltaic performance also depends greatly on the redox couple concentration in iodide∖triiodide. Jsc decreases as the redox concentration increases as a result of increased viscosity of the solution which lowers ion mobility. Similarly, Voc decreases as the electrolyte concentration increases due to enhanced back electron transfer reaction. An optimum power conversion efficiency of 4.3% was obtained in a DSSC with the TiO2 film thickness of 13.5μm and redox concentration of 0.03mol dm−3 under AM 1.5G illumination at 100mW/cm2.

Photocurrent response loss of dye sensitized solar cells owing to top surface nanograss growth and bundling of anodic TiO2 nanotubes

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Effect of the Geometry of the Anodized Titania Nanotube Array on the Performance of Dye-Sensitized Solar Cells.

Enhanced Performance of Dye-Sensitized Solar Cells based on TiO2 Nanotube Membranes using Optimized Annealing Profile

Effect of TiO2 electrode thickness on photovoltaic properties of dye sensitized solar cell based on randomly oriented Titania nanotubes

Post-Fabrication Annealing Effects in Polymer-Nanotube Photovoltaic Cells

Enhanced Efficiency for Dye-Sensitized Solar Cells Using A Surface-Treated Photo-Anode

High-Temperature Annealing of TiO2 Nanotube Membranes for Efficient Dye-Sensitized Solar Cells

A Comparison of Anodic TiO2 Nanotube Membranes used for Front-side Illuminated Dye-Sensitized Solar Cells

Influence Of Applied Voltage On Anodized Tio2 Nanotube Arrays And Their Performance On Dye Sensitized Solar Cells

Investigations of Anodization Parameters and TiCl4 Treatments on TiO2 Nanostructures for Highly Optimized Dye-Sensitized Solar Cells

High-Performance and Stable Gel-State Dye-Sensitized Solar Cells Using Anodic TiO2 Nanotube Arrays and Polymer-Based Gel Electrolytes

A facile route to fabricate an anodic TiO 2 nanotube-nanoparticle hybrid structure for high efficiency dye-sensitized solar cells

Charge Transport and Recombination in Dye-Sensitized Solar Cells Based on Hybrid Films of TiO2 Particles/tio2 Nanotubes

Open-circuit voltage improvement by using TiO2 nanotubes as a working electrode of dye-sensitized solar cell

The Effect of Drying and Thickness of TiO2 Electrodes on the Photovoltaic Performance of Dye-Sensitized Solar Cells

Substrate Diameter-Dependent Photovoltaic Performance of Flexible Fiber-Type Dye-Sensitized Solar Cells with TiO2 Nanoparticle/TiO2 Nanotube Array Photoanodes

TiO2 nanotube based dye-sensitized photoanode

Tunable Fabrication of TiO2 Nanotube Arrays with High Aspect Ratio and Its Application in Dye Sensitized Solar Cell

EFFECTS OF TiO2 FILM THICKNESS AND ELECTROLYTE CONCENTRATION ON PHOTOVOLTAIC PERFORMANCE OF DYE-SENSITIZED SOLAR CELL

Thickness-dependent electron transport performance of mesoporous TiO2 thin film for dye-sensitized solar cells