Abstract:Combined structure of anodic TiO2 nanotubes and TiO2 nanoparticles (TiNTs-TiNPs) has been synthesized by a facile combination of hydrothermal and chemical vapor deposition methods. Ordered TiO2 nanotubes with smooth walls were fabricated by two step anodization method in ethylene glycol containing NH4F at 50 V. This nanotubular array after annealing at 450 °C was subjected to the hydrothermally produced gaseous environment in an autoclave with diluted TiCl4 solution at its bottom. Vapors of TiCl4 were allowed to react chemically with water vapors for predefined time durations at 180 °C that resulted in the deposition of TiO2 nanoparticles on tubes’ surface and side walls. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) confirmed that for one hour reaction duration, nanoparticles were evenly coated on the walls of nanotubes, whereas, longer durations tend to deteriorate the tubular structure. Consequently, the ordered TiNTs-TiNPs array produced after one hour coating has shown better performance for dye-sensitized solar cell DSSC) in back illumination mode with 130% increase in efficiency as compared to the device based on bare TiO2 nanotubes. The same photoanode has higher reflective properties with higher scattering ability. The solar cell based on this photoanode exhibits higher external quantum efficiency and effective charge transport properties. This study shows that porous ordered 1D structures based on TiO2 are of crucial importance for the high performance of DSSCs.

Large diameter TiO$_2$ nanotubes enable integration of conformed hierarchical and blocking layers for enhanced dye-sensitized solar cell efficiency

Hierarchical DSSC structures based on single walled TiO2 nanotube arrays reach back-side illumination solar light conversion efficiency of 8%

Large-diameter Titanium Dioxide Nanotube Arrays As a Scattering Layer for High-Efficiency Dye-Sensitized Solar Cell

High Efficiency Dye-Sensitized Solar Cells Based on Hierarchically Structured Nanotubes

Design of Multi-Layered Tio2 Nanotube/Nanoparticle Hybrid Structure for Enhanced Efficiency in Dye-Sensitized Solar Cells

Dye-Sensitized Solar Cells Based on TiO2 Nanotube and Shelled Arrayed Structures

Synthesis of Long TiO2 Nanotube Arrays with a Small Diameter for Efficient Dye-Sensitized Solar Cells

Hydrothermally growth of novel hierarchical structures titanium dioxide for high efficiency dye-sensitized solar cells

Solar Cells: Hierarchically Structured Nanotubes for Highly Efficient Dye‐Sensitized Solar Cells (adv. Mater. 22/2013)

Au/TiO2 Nanotube Array Based Multi-Hierarchical Architecture for Highly Efficient Dye-Sensitized Solar Cells

Highly ordered combined structure of anodic TiO2 nanotubes and TiO2 nanoparticles prepared by a novel route for dye-sensitized solar cells

Improved Performance in Dye-Sensitized Solar Cells by Rationally Tailoring Anodic Tio2 Nanotube Length

The TiO 2 Hierarchical Structure with Nanosheet Spheres for Improved Photoelectric Performance in Dye-Sensitized Solar Cells

Construction of Hierarchically Structured Tio2 Nanotube Arrays for Efficient Dye-Sensitized Solar Cells

Highly-Ordered Tio2 Nanotube Arrays with Double-Walled and Bamboo-Type Structures in Dye-Sensitized Solar Cells

Enhanced Efficiency for Dye-Sensitized Solar Cells Using A Surface-Treated Photo-Anode

Rational Design of Anatase Tio2 Architecture with Hierarchical Nanotubes and Hollow Microspheres for High-Performance Dye-Sensitized Solar Cells

Double‐Layer Structure Photoanode with TiO2 Nanotubes and Nanoparticles for Dye‐Sensitized Solar Cells

Toward hierarchical TiO2 nanotube arrays for efficient dye-sensitized solar cells.

Coaxial Multi-Shelled Tio2 Nanotube Arrays For Dye Sensitized Solar Cells

Ultralong, small-diameter TiOTiO₂ nanotubes achieved by an optimized two-step anodization for efficient dye-sensitized solar cells.