Abstract:The purpose of this paper is to examine the microstructural evolution and mechanical properties of Ni/Ti laminated composite produced by a cross-accumulative roll bonding (CARB) method. The SEM images showed that no void and delamination were observed which indicates that the layers were strongly bonded together. In addition to the thickness reduction and increased number of interfaces, plastic instabilities took place with an increase in CARB passes; the wavy-like interfaces appeared as a result of the necking and shear bands formation. However, due to the effect of uniform rolling pressure and rotation of rolling direction during the CARB process, all layers remained continuous in all CARB passes. The most marked observation coming from EBSD analyses was the formation of fine grains surrounded by a high fraction of high-angle grain boundaries (HAGBs). Based on the microtexture analyses on Ti and Ni layers, it was found that by increasing the rolling passes, a crystallographic texture formed in Ti layers gradually changes from the basic {0001}<112 ̅0 > system into the system dominated by {0001}<101 ̅0 > prismatic-like orientations. In the case of the crystallographic texture formed in Ni layers, there was a significant increase in the intensity of the Q{013}<231>; P{011}<122 > and Goss {011}<100>, indicating the formation of shear strain-assisted type of texture. Furthermore, with an increase in the CARB passes, the mechanical properties improved due to strong interfaces and grain refinement. The maximum values of the yield strength, tensile strength, and elongation reached 842 MPa, 936 MPa, and 7.1% respectively, in the final CARB pass. In addition, ductile fracture mainly occurred on fracture surfaces of Ti and Ni layers even though by increasing passes, cleavage facets appeared due to strain hardening.Graphic Abstract

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

Hierarchical Refinement of Nickel-Microalloyed Titanium During Additive Manufacturing

Microstructure, Mechanical, and Tribological Properties of Nb-Doped TiAl Alloys Fabricated via Laser Metal Deposition

Mechanical Behavior and Shape Memory Effects of NixTi1‐x alloys with Tunable Mixing of Ni/Ti Powders by Laser Directed Energy Deposition

Microstructure Evaluation and High-Temperature Wear Performance of Hard Protective Layer Deposited on Titanium Alloy via Laser Metal Deposition

Grain refinement and strengthening of additively manufactured Nb by doping TiC nanoparticle prepared via laser directed energy deposition

Optimization of Processing Parameters and Microstructure Evolution of (TiB+La 2 O 3 )/Ti6Al4V Manufactured by Laser Melting Deposition

Achieving grain refinement and ultrahigh yield strength in laser aided additive manufacturing of Ti−6Al−4V alloy by trace Ni addition

Microstructure and performance optimization of laser cladding nano-TiC modified nickel-based alloy coatings

Chemical, microstructure, and mechanical property of TiAl alloys produced by high-power direct laser deposition

Effect of TiB 2 on the microstructure and mechanical properties of TiAl alloy produced by laser direct energy deposition

Phase transformation mechanism and mechanical properties of Ti-45Al-8Nb alloy prepared by directed laser deposition

Laser metal deposition for additive manufacturing of AA5024 and nanoparticulate TiC modified AA5024 alloy composites prepared with balling milling process

Interfacial Microstructures and Mechanical Properties of TiC Reinforced GH 3230 Superalloy Manufactured by Laser Metal Deposition

The Enhancement Effect of Carbides on the Printability and Mechanical Properties of a Ni–Fe–Cr–Al–Ti Alloy Processed by Electron Beam Freeform Fabrication

Effect of TiB2 Addition on the Microstructure and Mechanical Properties of Laser-Directed Energy Deposition TiAl Alloy

Nano-lamellar Ti3Al/TiAl Alloy Prepared Via Dual-Wire-fed Electron Beam-Directed Energy Deposition: Microstructure Evolution and Nanohardness Enhancement

Microstructure, Texture and Tensile Properties of Nickel/Titanium Laminated Composites Produced by Cross Accumulative Roll Bonding Process

Laser Melting Deposition of CP-Ti/Ti–0.4Ni Graded Material for Structural Applications