Abstract:The relevant phase transformations induced by atomic diffusion at the vicinity of Nb/TiAl heterogenous interface were systematically investigated by establishing a novel system of TiAl-Nb couple via metallurgical bonding of Nb block and γ-TiAl powders by hot pressing sintering and post-annealing treatments. As a result, the resultant diffusion layer, acting as adhesive region linking the Nb and TiAl substrates, thickened with the increase of annealing temperature and the prolongation of holding time, which could be well described by the developed power function. A series of intermediate phases initially nucleated at the Nb/TiAl interface and grew toward both substrates, which was the result of the exchange, partitioning and recombination of solute atoms in the light of vacancy-mediated substitutional diffusion pattern. The phase transformation path on the Nb side was β→η→η + σ→σ→β 0 →β 0 + γ n , while that on the TiAl side was γ→γ ss →γ ss + α→(γ + α)+ (α + β 0 )→α + β 0 →β 0 + γ n . Then the disorder-order transition of α→α 2 and β 0 →B2 occurred during cooling. The progress of phase transformation slowed down as the diffusion proceeded, which was attributed to the decrease in atomic substitution efficiency due to the reduction of atomic concentration gradient and the extension of migration distance. In such a case, the banded σ ba split into spike σ sp along the direction of maximum concentration gradient, and then shrunk to isolated σ is until completely dissolved in β 0 regime, principally dominated by Ti occupying Nb sublattices. The lenticular γ n existed mainly in the form of twins, resulting from the lattice reconstruction in accordance with the orientation relationship of 111γ//110β0 and 1̅10γ//11̅1β0 in the Al partitioning region during the spontaneous fluctuation of atomic concentration of β 0 regime. These findings filled some fundamental gaps with respect to TiAl-Nb diffusion reaction system, and afforded profound insights into the development of high-performance TiAl/Nb composites with tailorable microstructure.

Phase transformation mechanism and mechanical properties of Ti-45Al-8Nb alloy prepared by directed laser deposition

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

The columnar dendrite and equiaxed dendrite transformation of high Nb-TiAl alloy by laser-directed energy deposition

Microstructure, Mechanical, and Tribological Properties of Nb-Doped TiAl Alloys Fabricated via Laser Metal Deposition

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

Structural transformation behavior in a high Nb–TiAl alloy additively manufactured by laser powder bed fusion

Investigation of the Influence of Process Parameters on Crack Formation and Mechanisms in Ti-48Al-2Cr-2Nb Alloy via Laser Directed Energy Deposition

Effect of annealing treatment on microstructure and tensile properties of Ti-48Al-2Cr-5Nb alloy fabricated by laser additive manufacturing

Microstructure characteristics of a γ single-phase Ti-55Al-7.5Nb alloy fabricated via additive manufacturing

Promoted Phase Transformation of Α2 to O in Ti2AlNb Alloy with Improved Mechanical Performance Via Laser Shock Peening

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Microstructure Evolution and Phase Transformations in Ti-22Al-25Nb Alloys Tailored by Super-Transus Solution Treatment

The Martensitic Transformation and Mechanical Properties of Ti6Al4V Prepared Via Selective Laser Melting

Study of microstructure and compressive strength of a novel Ti-0.75Al-9.5V alloys manufactured by laser deposition melting

Evolution of microstructure and mechanical property of Ti-47Al-2Cr-2Nb intermetallic alloy by laser direct energy deposition: From a single-track, thin-wall to bulk

Microstructural evolution and mechanical properties of Ti55531–0.5Nb fabricated by selective laser melting under different heat treatments

Atomic diffusion and microstructural evolution at the Nb/TiAl heterogenous interfaces during annealing at elevated temperatures

Ti-48Al-2Cr-2Nb alloys prepared by electron beam selective melting additive manufacturing: microstructural and tensile properties

Study on phase transformation behavior and mechanical properties of equiatomic ratio NiTi alloy formed by selective laser melting

Influence of Heat Treatments on Microstructure and Mechanical Properties of Ti⁻26Nb Alloy Elaborated In Situ by Laser Additive Manufacturing with Ti and Nb Mixed Powder

The α 2 to orthorhombic O-phase transformation-facilitated high elastically mediated strain transfer ability in high Nb-TiAl alloys