Abstract:A highly efficient and clean biomass energy-based calcium carbide-acetylene production system, including low-carbon energy supply, solid waste recycling and cascade utilization of waste heat, has been developed for the conventional energy-intensive and highly polluting fossil fuel-dependent calcium carbide industry. This system supplies the carbide-acetylene production plant with energy from the gasification of biomass and converts the plant's solid waste carbide slag into the calcium feedstock required by the plant. The waste heat from the plant's high-temperature exhaust gases is recycled and used via the multi-stage heat exchange, so that the energy cascade conversion and utilization is achieved. A simulation model of the plant is created in Aspen Plus, and a mathematical model for the biomass gasification process and cycle compensation of the calcium source through the Fortran language is written and embedded. When calculating the carbon consumption and CO(2)e emissions of the system, it was found that the carbon consumption and CO2e emissions of the conventional process were 5.43 t Coal center dot t(-1)C(2)H(2) and 2.25 t CO(2)e center dot t(-1)C(2)H(2), respectively. However, the carbon consumption of the new process was reduced by 65.19%, and carbon emissions by 27.24% in comparison. The energy analysis shows that the energy efficiency of the system is 36.21% for the conventional process and 44.82% for the new processes. The exergy analysis of the effective energy shows that the exergy efficiency of the new process is 73.20%, which is 52.98% better than that of the conventional process. Introduction of an index, the levelized income of acetylene product (LIOA), to characterize the product income of the system. When the price of acetylene is between 2.23 $/kg and 4.19 $/kg, the LIOA for the conventional and the new processes are 1.41 $/kg to 3.38 $/kg and - 1.28 $/kg to 0.68 $/kg, respectively. It is worth noting that the critical price (PCC2H2) for products generating net revenue from the new process is 3.17 $/kg. This study is of great importance for the development of a low-carbon biomass-coupled calcium carbide-acetylene process.

Process design and techno-economic analysis of activated carbon derived from anthracite coal

Key Technologies and Application of Producing Basic Chemical Materials from Low-Rank Coal

Reliable Method and Multistage Process Involved in the Production of Activated Carbon Based on Raw Material-A Systematic Review

Preparation of micro-porous monolithic activated carbon from anthracite coal using coal tar pitch as binder

Design, Cost Estimation and Sensitivity Analysis for a Production Process of Activated Carbon from Waste Nutshells by Physical Activation

Synthesis of coal tar sludge-based activated carbon: insights into thermal rate, surface complexes and pore development

Preparation of amorphous coal-based activated coke via a two-step process of carbonization and steam activation

Performance on desulfurization and denitrification of one-step produced activated carbon for purification of sintering flue gas

Analysis of Key Techniques and Economic Feasibility for One-Step Production of Acetylene by Coal Pyrolysis in Thermal Plasma Reactor

Activation of Poplar Sawdust and Anthracite Coal: Distinct Involvement of Aliphatic and Aromatic Structures in Pore Development

Comparative life cycle assessment of activated carbon production from various raw materials

A Novel Melt Infiltration Method Promoting Porosity Development of Low-Rank Coal Derived Activated Carbon As Supercapacitor Electrode Materials

The environmental impacts via life cycle assessment of activated carbon produced by Fiddlewood and Jacaranda biomass

An analysis of the carbonization process and volatile-release characteristics of coal-based activated carbon

The Research Advance of Preparation Process and Surface Property of Coal Based Activated Carbon

Manufacturing Options for Activated Carbons with Selected Synthetic Polymers as Binders

Optimized preparation of activated carbon with high porosities based on puck shells (Afrostyrax lepidophyllus) by response surface methodology and physico-chemical characterization

Synthesis of activated carbon from high-carbon coal fly ash and its hydrogen storage application

Efficient Production of Activated Carbon with Well-Developed Pore Structure Based on Fast Pyrolysis-Physical Activation

A New Strategy to Produce Calcium Carbide-Acetylene from Integrated Multi-Level Low Carbon Construction Driven by Biomass

Template-free preparation of anthracite-based nitrogen-doped porous carbons for high-performance supercapacitors and efficient electrocatalysts for the oxygen reduction reaction