Abstract:Four solid wastes including sludge, watermelon rind, corncob, and eucalyptus and their demineralized samples were selected to conduct pyrolysis experiments under different experimental conditions, including temperature, residence time, carrier gas flow rate, and heating rate, respectively. The co‐pyrolysis experiment was carried out after mixing different types and different ratios of solid wastes to investigate the influence of different factors on yield of char, tar, and gas. A three‐layer artificial neural network (ANN) based on back propagation (BP) algorithm was developed and trained to simulate and predict the yield of products. The experimental conditions and characteristic parameters of samples, including the content of C, H, K, Ca, Mg, Fe, volatile, ash, and fixed carbon, were selected as input parameters while the yields of char, tar, and gas were selected as output parameters. The effect of input parameters including residence time, carrier gas flow rate, heating rate, and the content of metal elements on the network performance was investigated in detail to optimize the ANN model. It was found that the metal element has the greatest influence, and its importance to the yield of each product exceeds 25%. The pyrolysis experimental data of single‐component solid waste were selected as the model training set for model learning and training and then use the trained model to predict the co‐pyrolysis experimental data of multi‐component solid waste. Good agreement was achieved between experimental and predicted results; the correlation coefficient was 0.9836, and the root mean square error (RMSE) was only 2.4273, which revealed that the ANN method can be effectively used in predicting of the gas‐liquid‐solid product distribution after solid waste pyrolysis process.Novelty StatementIn this manuscript, based on the principle of artificial neural network, experimental conditions and sample characteristic parameters are used as input variables to model the distribution of different sample pyrolysis products. The model is used to predict the co‐pyrolysis data, and the influences of input parameters on the accuracy of the model are analyzed. The model values are in good agreement with the experimental data, indicating that the model is a high accurate general model and can be applied to different samples.

A novel study on activated carbon production based on artificial neural network model: An experimental and artificial intelligence method approach

Direct Prediction of Steam Cracking Products from Naphtha Bulk Properties: Application of the Two Sub-Networks ANN

Machine Learning Prediction of the Yield and BET Area of Activated Carbon Quantitatively Relating to Biomass Compositions and Operating Conditions

Machine Learning Application for Predicting Key Properties of Activated Carbon Produced from Lignocellulosic Biomass Waste with Chemical Activation

Prediction of char production from slow pyrolysis of lignocellulosic biomass using multiple nonlinear regression and artificial neural network

Artificial Neural Network Model for the Prediction of Methane Bi-Reforming Products Using CO2 and Steam

Activated biochar production from young coconut waste (Cocos nucifera) as bioadsorbent: a pathway through Artificial Neural Network (ANN) optimization

Multi-output neural network model for predicting biochar yield and composition

Prediction of Anoxic Sulfide Biooxidation under Various Hrts Using Artificial Neural Networks

Predicting model of CH4-CO2 reforming on Ni/Al2O3 catalyst by improved back propagation (BP) neural network

Artificial neural networks for the prediction of biochar yield: A comparative study of metaheuristic algorithms

Prediction of gas‐liquid‐solid product distribution after solid waste pyrolysis process based on artificial neural network model

Machine Learning-Based Prediction of the Adsorption Characteristics of Biochar from Waste Wood by Chemical Activation

Predicting kinetic parameters for coal devolatilization by means of Artificial Neural Networks

Analysis of Mass Transfer Performance of Monoethanolamine-Based CO2 Absorption in a Packed Column Using Artificial Neural Networks

Modeling and Optimization of the Nox Emission Characteristics of A Tangentially Fired Boiler with Artificial Neural Networks

Prediction of Product Distributions in Coal Devolatilization by an Artificial Neural Network Model

Bayesian Analysis of Combustion Kinetic Model for Acetic Acid Using Artificial Neural Network

Neural Network Model for Working Capacity Prediction of VOCs Adsorption on Carbon Materials

Simulation of Direct Coal Liquefaction in Batch Reactors by Artificial Neural Networks

The Modeling and Products Prediction for Biomass Oxidative Pyrolysis Based on PSO-ANN Method: an Artificial Intelligence Algorithm Approach