Abstract:Four solid wastes including sludge, watermelon rind, corncob, and eucalyptus and their demineralized samples were selected to conduct pyrolysis experiments under different experimental conditions, including temperature, residence time, carrier gas flow rate, and heating rate, respectively. The co‐pyrolysis experiment was carried out after mixing different types and different ratios of solid wastes to investigate the influence of different factors on yield of char, tar, and gas. A three‐layer artificial neural network (ANN) based on back propagation (BP) algorithm was developed and trained to simulate and predict the yield of products. The experimental conditions and characteristic parameters of samples, including the content of C, H, K, Ca, Mg, Fe, volatile, ash, and fixed carbon, were selected as input parameters while the yields of char, tar, and gas were selected as output parameters. The effect of input parameters including residence time, carrier gas flow rate, heating rate, and the content of metal elements on the network performance was investigated in detail to optimize the ANN model. It was found that the metal element has the greatest influence, and its importance to the yield of each product exceeds 25%. The pyrolysis experimental data of single‐component solid waste were selected as the model training set for model learning and training and then use the trained model to predict the co‐pyrolysis experimental data of multi‐component solid waste. Good agreement was achieved between experimental and predicted results; the correlation coefficient was 0.9836, and the root mean square error (RMSE) was only 2.4273, which revealed that the ANN method can be effectively used in predicting of the gas‐liquid‐solid product distribution after solid waste pyrolysis process.Novelty StatementIn this manuscript, based on the principle of artificial neural network, experimental conditions and sample characteristic parameters are used as input variables to model the distribution of different sample pyrolysis products. The model is used to predict the co‐pyrolysis data, and the influences of input parameters on the accuracy of the model are analyzed. The model values are in good agreement with the experimental data, indicating that the model is a high accurate general model and can be applied to different samples.

Prediction of biochar characteristics and optimization of pyrolysis process by response surface methodology combined with artificial neural network

Multi-output neural network model for predicting biochar yield and composition

Simulation and optimization of co-pyrolysis biochar using data enhanced interpretable machine learning and particle swarm algorithm

Machine learning assisted prediction of specific surface area and nitrogen content of biochar based on biomass type and pyrolysis conditions

Machine learning predicting and engineering the yield, N content, and specific surface area of biochar derived from pyrolysis of biomass

Machine learning prediction of biochar physicochemical properties based on biomass characteristics and pyrolysis conditions

Artificial neural networks for the prediction of biochar yield: A comparative study of metaheuristic algorithms

Prediction of char production from slow pyrolysis of lignocellulosic biomass using multiple nonlinear regression and artificial neural network

Prediction model for biochar energy potential based on biomass properties and pyrolysis conditions derived from rough set machine learning

Development of predictive model for biochar surface properties based on biomass attributes and pyrolysis conditions using rough set machine learning

Integrating Taguchi method and artificial neural network for predicting and maximizing biofuel production via torrefaction and pyrolysis

Biochar yield prediction using response surface methodology: effect of fixed carbon and pyrolysis operating conditions

Prediction of gas‐liquid‐solid product distribution after solid waste pyrolysis process based on artificial neural network model

Predicting and refining acid modifications of biochar based on machine learning and bibliometric analysis: Specific surface area, average pore size, and total pore volume

Machine Learning Prediction of Biochar Yield and Carbon Contents in Biochar Based on Biomass Characteristics and Pyrolysis Conditions

Co-pyrolysis of municipal solid waste and rice husk gasification tar to prepare biochar: An optimization study using response surface methodology

Comparison of Artificial Neural Networks and kinetic inverse modeling to predict biomass pyrolysis behavior

Machine learning prediction of higher heating value of biochar based on biomass characteristics and pyrolysis conditions

Enhancing biomass Pyrolysis: Predictive insights from process simulation integrated with interpretable Machine learning models

Insight into nettle straw pyrolysis: Multicomponent kinetics, gas emissions and machine learning models

Machine learning models for the prediction of total yield and specific surface area of biochar derived from agricultural biomass by pyrolysis