Abstract:The management of sewage sludge is currently an open issue due to the large volume of waste to be treated and the necessity to avoid incineration or landfill disposal. Hydrothermal carbonization (HTC) has been recognized as a promising thermochemical technique to convert sewage sludge into value-added products. The hydrochar (HC) obtained can be suitable for environmental application as fuel, fertilizer, and sorbent. In this study, activated hydrochars (AHs) were prepared from sewage sludge through HTC followed by chemical activation with potassium hydroxide (KOH) and tested for the removal of pollutants in gaseous and aqueous environments, investigating carbon dioxide (CO2) and ciprofloxacin (CIP) adsorption capacity. The effects of activation temperature (550-750 °C) and KOH/HC impregnation ratio (1-3) on the produced AHs morphology and adsorption capacity were studied by Response Surface Methodology (RSM). The results of RSM analysis evidenced a maximum CO2 uptake of 71.47 mg/g for mild activation conditions (600-650 °C and KOH/HC = 1 ÷ 2), whereas the best CIP uptake of 628.61 mg/g was reached for the most severe conditions (750 °C, KOH/HC = 3). The prepared AHs were also applied for the removal of methylene blue (MB) from aqueous solutions, and the MB uptake results were used for estimating the specific surface area of AHs. High surface areas up to 1902.49 m2/g were obtained for the highest activation temperature and impregnation ratio investigated. Predictive models of CO2 and CIP uptake were developed by RSM analysis, and the optimum activation conditions for maximizing the adsorption performance together with high AH yield were identified: 586 °C and KOH/HC ratio = 1.34 for maximum yield (26.33 %) and CO2 uptake (67.31 mg/g); 715 °C and KOH/HC ratio = 1.78 for maximum yield (18.75 %) and CIP uptake (370.77 mg/g). The obtained results evidenced that chemical activation of previously HTC-treated sewage sludge is a promising way to convert waste into valuable low-cost adsorbents.

Synthesis of coal tar sludge-based activated carbon: insights into thermal rate, surface complexes and pore development

One-pot Synthesis of Ultrahigh Surface Area Porous Carbon from Coal Tar Residue: Characterization and Application in Phenol Removal

Preparation of micro-porous monolithic activated carbon from anthracite coal using coal tar pitch as binder

Preparation of Activated Carbon Adsorption Materials Derived from Coal Gasification Fine Slag Via Low-Temperature Air Activation

Preparation of Porous Carbon Materials Derived from Hyper-Cross-Linked Asphalt/Coal Tar and Their High Desulfurization Performance

Meso-porous activated carbon from lignite waste and its application in methylene Blue adsorption and coke plant effluent treatment

Production and Characterization of High Quality Activated Carbon from Oily Sludge

Preparation of porosity-adjustable porous adsorbent materials derived from coal solid waste

Activated Carbon as Superadsorbent and Sustainable Material for Diverse Applications

Synergistic Effects of Mixing Waste Activated Carbon and Coal in Co-Slurrying and CO2 Co-Gasification

Process design and techno-economic analysis of activated carbon derived from anthracite coal

Pyrolysis kinetics and reaction mechanisms of coal slime for cleaner energy

De-agglomeration and homogenisation of nanoparticles in coal tar pitch-based carbon materials

Carbon nanotubes synthesis over coal ash based catalysts using polypropylene waste via CVD process: Influence of catalyst and reaction temperature

Activated Carbons from Co-Mingled Liquid

Tailoring the porosity of chemically activated carbons derived from the HTC treatment of sewage sludge for the removal of pollutants from gaseous and aqueous phases

Synthesis and Characterization of Biochar Activated Carbon for Oil Spills Removal

Selective adsorption and bioavailability relevance of the cyclic organics in anaerobic pretreated coal pyrolysis wastewater by lignite activated coke

Graded Synthesis of Hierarchical Activated Carbon and Mesoporous Silica Microspheres from High Carbon Coal Gasification Fine Slag for Ultra-High Capacity Adsorption of Methyl Blue

Synthesis of multifunctional porous carbon-silicon composites from coal gasification fine slag: Adsorption of methylene blue and microwave-induced biomass catalytic pyrolysis

Catalytic effect of industrial waste carbide slag on pyrolysis of low-rank coal