Abstract:Addressing the escalating threat of environmental pollution and ecological risks resulting from the discharge of organic pollutants into aquatic environments demands immediate and comprehensive solutions. In this context, leveraging agricultural waste to produce activated carbon appears to be an intriguing approach to resolving this pressing environmental problem. This study employed doum fiber ( Chamaerops humilis ) as an alternative precursor for producing low-cost and mesoporous activated carbon (ACDF) with a high surface area (630.92 m 2 /g) through a pyrolysis method involving chemical activation with H 3 PO 4 . The adsorption characteristics of ACDF were investigated for removing phenolic pollutants: Bisphenol A (BPA) and α-Naphthol (ANP). The optimal activation conditions were determined using response surface methodology with full factorial design (RSM-FFD), considering four variable factors: Activation temperature (200–600 °C), Activation time (30–180 min), Concentration of H 3 PO 4 (1–10 mol/L), and Impregnation Ratio (0.5–2 g/mL). The results indicated that the best activation conditions were an activation temperature of 600 °C, an activation time of 43.46 min, an H 3 PO 4 concentration of 8 mol/L, and an impregnation ratio of 0.5. The adsorption equilibrium data from kinetics and isotherm analyses demonstrated that the adsorption of BPA and ANP onto ACDF is appropriately described by the pseudo-second-order and Langmuir models. The maximum adsorption capacity of ACDF was 56.11 mg/g for BPA and 69.97 mg/g for ANP. Thermodynamic parameters indicated that the reactions of both pollutants on the ACDF surface were spontaneous, favorable, and exothermic. Moreover, ACDF displayed a higher affinity and stability over five successive cycles for ANP compared to BPA, owing to its reactivity as confirmed by Density Functional Theory (DFT). The interaction mechanism between the adsorbate and the ACDF surface involved main interactions such as electrostatic interaction, hydrogen bonding, and π-π interactions. The results demonstrate that the optimized ACDF is a cost-effective and readily available option for removing phenolic pollutants from industrial wastewater.

Synthesis and Characterization of Biochar Activated Carbon for Oil Spills Removal

Synthesis and characterization of activated carbon from biomass date seeds for carbon dioxide adsorption

Surface Characteristics of Activated Carbon Sorbents Obtained from Biomass for Cleaning Oil-Contaminated Soils

Synthesis and Characterization of Activated Carbon from Agrowastes for the Removal of Acetic Acid from an Aqueous Solution

Production and Characterization of High Quality Activated Carbon from Oily Sludge

Synthesis and characterizations of conocarpus- and azadirachta-derived activated carbons as wastewater recycling material

Exploring the structural characteristics and adsorption capabilities of cost-effective N- doped activated carbon derived from waste biomass for CO2 adsorption

Synthesis and optimization of activated carbon from Doum ( Chamaerops humilis ) fiber via pyrolysis-assisted H 3 PO 4 activation for removal of bisphenol A and α-Naphthol

Mesoporous Carbon from Optimized Date Stone Hydrochar by Catalytic Hydrothermal Carbonization Using Response Surface Methodology: Application to Dyes Adsorption

Preparation and characterisation of graphitic biochar materials derived from rose oil industry waste via different pyrolysis durations and ball milling for advanced composites.

Pyrolysis of Mixed Date Stones and Pistachio Shells: Identification of Bio-Oil and Utilization of Bio-Char as Activated Carbon Precursor

Activated carbon and their nanocomposites derived from vegetable and fruit residues for water treatment

Date Palm Biochar and Date Palm Activated Carbon as Green Adsorbent—Synthesis and Application

Adsorption Studies of Oil Spill Clean-up Using Coconut Coir Activated Carbon (CCAC)

Sludge-based activated biochar for adsorption treatment of real oil sands process water: Selectivity of naphthenic acids, reusability of spent biochar, leaching potential, and acute toxicity removal

Preparation and Characterization of Activated Carbon from the Cones of Iranian Pine Trees (Pinus eldarica) by Chemical Activation with H3PO4 and Its Application for Removal of Sodium Dodecylbenzene Sulfonate Removal from Aqueous Solution

Synthesis of hydrochar from date palm seeds using microwave-enhanced hydrothermal carbonization and its application in dyes removal

Activated-hydrochar derived from olive mill wastes for the removal of phenolic compounds from olive mill wastewater

Development of sludge-based activated char sorbent with enhanced hydrophobicity for oil spill cleanup

Fabrication of Activated Carbon Derived from Glycerin Pitch for Desulfurization of Model Fuel Oil and Electrode Application

Low-cost activated carbon production from organic waste and its utilization for wastewater treatment