Abstract:Addressing the escalating threat of environmental pollution and ecological risks resulting from the discharge of organic pollutants into aquatic environments demands immediate and comprehensive solutions. In this context, leveraging agricultural waste to produce activated carbon appears to be an intriguing approach to resolving this pressing environmental problem. This study employed doum fiber ( Chamaerops humilis ) as an alternative precursor for producing low-cost and mesoporous activated carbon (ACDF) with a high surface area (630.92 m 2 /g) through a pyrolysis method involving chemical activation with H 3 PO 4 . The adsorption characteristics of ACDF were investigated for removing phenolic pollutants: Bisphenol A (BPA) and α-Naphthol (ANP). The optimal activation conditions were determined using response surface methodology with full factorial design (RSM-FFD), considering four variable factors: Activation temperature (200–600 °C), Activation time (30–180 min), Concentration of H 3 PO 4 (1–10 mol/L), and Impregnation Ratio (0.5–2 g/mL). The results indicated that the best activation conditions were an activation temperature of 600 °C, an activation time of 43.46 min, an H 3 PO 4 concentration of 8 mol/L, and an impregnation ratio of 0.5. The adsorption equilibrium data from kinetics and isotherm analyses demonstrated that the adsorption of BPA and ANP onto ACDF is appropriately described by the pseudo-second-order and Langmuir models. The maximum adsorption capacity of ACDF was 56.11 mg/g for BPA and 69.97 mg/g for ANP. Thermodynamic parameters indicated that the reactions of both pollutants on the ACDF surface were spontaneous, favorable, and exothermic. Moreover, ACDF displayed a higher affinity and stability over five successive cycles for ANP compared to BPA, owing to its reactivity as confirmed by Density Functional Theory (DFT). The interaction mechanism between the adsorbate and the ACDF surface involved main interactions such as electrostatic interaction, hydrogen bonding, and π-π interactions. The results demonstrate that the optimized ACDF is a cost-effective and readily available option for removing phenolic pollutants from industrial wastewater.

Preparation and Characterization of Activated Carbon from the Cones of Iranian Pine Trees (Pinus eldarica) by Chemical Activation with H3PO4 and Its Application for Removal of Sodium Dodecylbenzene Sulfonate Removal from Aqueous Solution

Synthesis and optimization of activated carbon from Doum ( Chamaerops humilis ) fiber via pyrolysis-assisted H 3 PO 4 activation for removal of bisphenol A and α-Naphthol

Adsorption of anionic wood dyes on KOH-activated carbons from Pinus radiata sawdust

Microporous Activated Carbon from Pisum sativum Pods Using Various Activation Methods and Tested for Adsorption of Acid Orange 7 Dye from Water

Synthesis and Characterization of Biochar Activated Carbon for Oil Spills Removal

Dye Removal of Activated Carbons Prepared from NaOH-pretreated Rice Husks by Low-Temperature Solution-Processed Carbonization and H3PO4 Activation

Preparation of activated biocarbons from cones and their potential application for adsorption of antibiotics (tetracycline)

Preparation, characterization and adsorption performance of mesoporous activated carbon with acidic groups

Promising Porous Carbon Material Derived from Argan Paste Cake by KOH Activation, for Paracetamol Removal

Mathematical analysis of the effect of process conditions on the porous structure development of activated carbons derived from Pine cones

Ultra-fast and ultra-efficient phenol removal from aqueous solution using a nano biocarbon adsorbent by RSM-CCD method: parameters, isotherm, kinetic, ANOVA

Performance and optimization of diclofenac and ibuprofen adsorption onto activated carbon synthesized from sunflower seed shell (Helianthus annuus) in natural groundwater samples

Synthesis and Characterization of Activated Carbon from Agrowastes for the Removal of Acetic Acid from an Aqueous Solution

High-surface-area activated carbon from pine cones for semi-industrial spray deposition of supercapacitor electrodes

Anionic Surfactant Adsorption on Activated Carbons Produced from Lignin and Modified with Cellulose Sulfoacetate

Activated Carbon Derived from Peltophorum pterocarpum (Copper Pod) Seeds and Phoenix dactylifera (Date Plam) Seeds in Batch Comparative Adsorption Studies of Fluoride

Preparation, characterization and adsorption performance of high surface area biomass-based activated carbons

Preparation of sludge-straw-based activated carbon and its adsorption of H2S

Steam activation of waste biomass: highly microporous carbon, optimization of bisphenol A, and diuron adsorption by response surface methodology

Optimization of Preparation of Microporous Activated Carbon with High Surface Area from Spartina Alterniflora and Its P-Nitroaniline Adsorption Characteristics

Sulfur-Doped Binary Layered Metal Oxides Incorporated on Pomegranate Peel-Derived Activated Carbon for Removal of Heavy Metal Ions